Skip to content

omni instruments | sensors and data acquisition equipment

Omni Instruments Ltd

Sales & Technical Support

  • +44 (0) 1382 443000
  • info@omni.uk.com
Omni Instruments Ltd
  • Home
  • Custom Systems
  • Our Brands
  • System Hires
  • About
  • Contact
  • Home
  • Custom Systems
  • Our Brands
  • System Hires
  • About
  • Contact
Products
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
  • Home
  • Custom Systems
  • Our Brands
  • System Hires
  • About
  • Contact
  • Home
  • Custom Systems
  • Our Brands
  • System Hires
  • About
  • Contact
Need Help?
£0.00 0 Basket
Product
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
£0.00 0 Basket

Products

Home / Products
  • Grid View
  • List View
12V 40Ah LiFePO4 Carry Case Kit

BATT-12V-40AH-PELI

Rechargeable battery pack, 12v, 40 amp hour, LiFePO4, operating temperature -20 to +60 deg C, with short circuit, over charge and discharge protection, self discharge rate 0.5% per day. . Fitted in IP65 peli case. With charge indicator. Supplied with smart charger. Weight: 6.0 kg. Dimensions: 300 x 249 x..
View Product

BETA-PULSE-OPTION-K=1

Pulse output option for Beta water meters 1Ltr/pulse. Not available on larger 50mm diameter flow meters...
View Product

BUNA-N

BUNA seal material, replaces standard Viton seal..
View Product

CA-11/46

HRSi voltage regulator for the Rutland 913 & FM910-4 wind charger, 12/24V. Provides overvoltage protection and will slow turbine when batteries are full. LED indicators for charging status and battery voltage for a single battery bank...
View Product

CA-12/15

Stainless steel tube pre-drilled at one end to suit a Windcharger for customers to adapt to own tower design. 1,000mm Length Stainless Steel Tube suitable for Rutland 504 Windcharger...
View Product
Solar Panel Edge Protection

CA-12/29

Push fit edge protection for SunWare solar panels. The Edge Protection will be fitted to panels when purchased with panels. 2m required for 25W, 3m for 38-75W and 4m for 100W SunWare solar panels. Max panel width 3.5mm. Priced per metre...
View Product

Cab_1m_RJ45

1m RJ45 cable for the Ethernet devices from Teracom...
View Product

CabU_1m_RJ11

1-Wire interface cable with RJ11 connectors. Cable length 1m. The CabU_1m_RJ11 cable can also be used to add one of the 1-Wire sensors with screwless terminals to a network by using the SPL2_RJ11 cable...
View Product

CAL-CAL

500ml Bottle of 1000 ppm Calcium Stock Solution for Dilution...
View Product

CAL-CAL-10

500ml Bottle of 10 ppm Calcium Stock Solution for Direct Calibration...
View Product

CAL-CAL-100

500ml Bottle of 100 ppm Calcium Stock Solution for Direct Calibration or diluted in a 9:1 ratio with Deionised water to prepare a 10ppm solution...
View Product

CAP-K-G1.5-3

Air Temperature probe with clamp 1.5m PTFE coated, triple insulated cable. Suitable for use with all substrate materials..
View Product

CDOM-CAL-600

600ml bottle of CDOM calibration solution. (For point 2 CDOM calibration)...
View Product

CEM-20

The CEM20 is the Channel Expansion Module for DT80 and DT85 data loggers Series 2 and above. This allows a further 60 single ended inputs (voltage, current or Thermocouple) or 20 fully differential inputs (PT100 or bridge) to be added to the DT80 or DT85. One full analogue input channel..
View Product

CHL-CAL

500ml Bottle of 1000 ppm Chloride Stock Solution for Dilution...
View Product

CHL-CAL-10

500ml Bottle of 10 ppm Chloride Stock Solution for Direct Calibration...
View Product

CHL-CAL-100

500ml Bottle of 10 ppm Chloride Stock Solution for Direct Calibration or diluted in a 9:1 ratio with Deionised water to prepare a 10ppm solution...
View Product

CRYO-IFC300

Cryotemp USB Download interface. Supplied with software, manual, docking station and USB connection cable...
View Product

DBBSS/TSF Torque & Tension Load Cell

Stainless Steel combined Torque and Axial Forces Load Cell. Ranges 1kN to 250kN, output 1.5mV/V to 3.0mV/V (refer to datasheet), accuracy 0.05%, sealed to IP65...
View Product
DFK - Duct Fixing Kit

DFK

Duct Fixing Kit (DFK). Kit includes 2m of 6mm i/d plastic tubing, 2 x pitot tubes and 4 fixing screws. The pitot tubes are cut at a 45° angle to allow it them to take static and dynamic air flow pressures...
View Product
DMI810 Serial Touchscreen Single Axis Inclinometer

DMI815-15-RS232

DMI815 Series Single Axis Inclinometer with touchscreen display for single axis readings. Range ±15° with an accuracy of 0.005° and 0.001° resolution. Built-in rechargeable battery suitable for up to 11 hours standalone operation from 3-4 hours charging, or infinite operation when powered (9-36vDC) by the wired connection. The RS232 connection..
View Product

DMI820-15-RS485

DMI820 Series Dual Axis Inclinometer with touchscreen display for X-axis and Y-axis readings. Range ±15° with an accuracy of 0.005° and 0.001° resolution. Built-in rechargeable battery suitable for up to 11 hours standalone operation from 3-4 hours charging, or infinite operation when powered (9-36vDC) by the wired connection. The RS485..
View Product

DMI825-15-RS232

DMI825 Series Dual Axis Inclinometer with touchscreen display for X-axis and Y-axis readings. Range ±15° with an accuracy of 0.005° and 0.001° resolution. Built-in rechargeable battery suitable for up to 11 hours standalone operation from 3-4 hours charging, or infinite operation when powered (9-36vDC) by the wired connection. The RS232..
View Product

DO-25

25ml DO Filling Solution for Galvanic DO Probes...
View Product
Previous Page1 … Page5 Next
12V 40Ah LiFePO4 Carry Case Kit

BATT-12V-40AH-PELI

Rechargeable battery pack, 12v, 40 amp hour, LiFePO4, operating temperature -20 to +60 deg C, with short circuit, over charge and discharge protection, self discharge rate 0.5% per day. . Fitted in IP65 peli case. With charge indicator. Supplied with smart charger. Weight: 6.0 kg. Dimensions: 300 x 249 x 119 mm ...
View Product

BETA-PULSE-OPTION-K=1

Pulse output option for Beta water meters 1Ltr/pulse. Not available on larger 50mm diameter flow meters. ...
View Product

BUNA-N

BUNA seal material, replaces standard Viton seal ...
View Product

CA-11/46

HRSi voltage regulator for the Rutland 913 & FM910-4 wind charger, 12/24V. Provides overvoltage protection and will slow turbine when batteries are full. LED indicators for charging status and battery voltage for a single battery bank. ...
View Product

CA-12/15

Stainless steel tube pre-drilled at one end to suit a Windcharger for customers to adapt to own tower design. 1,000mm Length Stainless Steel Tube suitable for Rutland 504 Windcharger. ...
View Product
Solar Panel Edge Protection

CA-12/29

Push fit edge protection for SunWare solar panels. The Edge Protection will be fitted to panels when purchased with panels. 2m required for 25W, 3m for 38-75W and 4m for 100W SunWare solar panels. Max panel width 3.5mm. Priced per metre. ...
View Product

Cab_1m_RJ45

1m RJ45 cable for the Ethernet devices from Teracom. ...
View Product

CabU_1m_RJ11

1-Wire interface cable with RJ11 connectors. Cable length 1m. The CabU_1m_RJ11 cable can also be used to add one of the 1-Wire sensors with screwless terminals to a network by using the SPL2_RJ11 cable. ...
View Product

CAL-CAL

500ml Bottle of 1000 ppm Calcium Stock Solution for Dilution. ...
View Product

CAL-CAL-10

500ml Bottle of 10 ppm Calcium Stock Solution for Direct Calibration. ...
View Product

CAL-CAL-100

500ml Bottle of 100 ppm Calcium Stock Solution for Direct Calibration or diluted in a 9:1 ratio with Deionised water to prepare a 10ppm solution. ...
View Product

CAP-K-G1.5-3

Air Temperature probe with clamp 1.5m PTFE coated, triple insulated cable. Suitable for use with all substrate materials ...
View Product

CDOM-CAL-600

600ml bottle of CDOM calibration solution. (For point 2 CDOM calibration). ...
View Product

CEM-20

The CEM20 is the Channel Expansion Module for DT80 and DT85 data loggers Series 2 and above. This allows a further 60 single ended inputs (voltage, current or Thermocouple) or 20 fully differential inputs (PT100 or bridge) to be added to the DT80 or DT85. One full analogue input channel on the logger is used to connect the CEM 20. ...
View Product

CHL-CAL

500ml Bottle of 1000 ppm Chloride Stock Solution for Dilution. ...
View Product

CHL-CAL-10

500ml Bottle of 10 ppm Chloride Stock Solution for Direct Calibration. ...
View Product

CHL-CAL-100

500ml Bottle of 10 ppm Chloride Stock Solution for Direct Calibration or diluted in a 9:1 ratio with Deionised water to prepare a 10ppm solution. ...
View Product

CRYO-IFC300

Cryotemp USB Download interface. Supplied with software, manual, docking station and USB connection cable. ...
View Product

DBBSS/TSF Torque & Tension Load Cell

Stainless Steel combined Torque and Axial Forces Load Cell. Ranges 1kN to 250kN, output 1.5mV/V to 3.0mV/V (refer to datasheet), accuracy 0.05%, sealed to IP65. ...
View Product
DFK - Duct Fixing Kit

DFK

Duct Fixing Kit (DFK). Kit includes 2m of 6mm i/d plastic tubing, 2 x pitot tubes and 4 fixing screws. The pitot tubes are cut at a 45° angle to allow it them to take static and dynamic air flow pressures. ...
View Product
DMI810 Serial Touchscreen Single Axis Inclinometer

DMI815-15-RS232

DMI815 Series Single Axis Inclinometer with touchscreen display for single axis readings. Range ±15° with an accuracy of 0.005° and 0.001° resolution. Built-in rechargeable battery suitable for up to 11 hours standalone operation from 3-4 hours charging, or infinite operation when powered (9-36vDC) by the wired connection. The RS232 connection can be used for connecting to a laptop or PC for synchronised display and to store data. Standard cable length 1m. The housing is a ...
View Product

DMI820-15-RS485

DMI820 Series Dual Axis Inclinometer with touchscreen display for X-axis and Y-axis readings. Range ±15° with an accuracy of 0.005° and 0.001° resolution. Built-in rechargeable battery suitable for up to 11 hours standalone operation from 3-4 hours charging, or infinite operation when powered (9-36vDC) by the wired connection. The RS485 connection can be used for connecting to a laptop or PC for synchronised display and to store data. Standard cable length 1m. The housing is ...
View Product

DMI825-15-RS232

DMI825 Series Dual Axis Inclinometer with touchscreen display for X-axis and Y-axis readings. Range ±15° with an accuracy of 0.005° and 0.001° resolution. Built-in rechargeable battery suitable for up to 11 hours standalone operation from 3-4 hours charging, or infinite operation when powered (9-36vDC) by the wired connection. The RS232 connection can be used for connecting to a laptop or PC for synchronised display and to store data. Standard cable length 1m. The housing is ...
View Product

DO-25

25ml DO Filling Solution for Galvanic DO Probes. ...
View Product
12V 40Ah LiFePO4 Carry Case Kit

BATT-12V-40AH-PELI

Rechargeable battery pack, 12v, 40 amp hour, LiFePO4, operating temperature -20 to +60 deg C, with short circuit, over charge and discharge protection, self discharge rate 0.5% per day. . Fitted in IP65 peli case. With charge indicator. Supplied with smart charger. Weight: 6.0 kg. Dimensions: 300 x 249 x..
View Product

BETA-PULSE-OPTION-K=1

Pulse output option for Beta water meters 1Ltr/pulse. Not available on larger 50mm diameter flow meters...
View Product

BUNA-N

BUNA seal material, replaces standard Viton seal..
View Product

CA-11/46

HRSi voltage regulator for the Rutland 913 & FM910-4 wind charger, 12/24V. Provides overvoltage protection and will slow turbine when batteries are full. LED indicators for charging status and battery voltage for a single battery bank...
View Product

CA-12/15

Stainless steel tube pre-drilled at one end to suit a Windcharger for customers to adapt to own tower design. 1,000mm Length Stainless Steel Tube suitable for Rutland 504 Windcharger...
View Product
Solar Panel Edge Protection

CA-12/29

Push fit edge protection for SunWare solar panels. The Edge Protection will be fitted to panels when purchased with panels. 2m required for 25W, 3m for 38-75W and 4m for 100W SunWare solar panels. Max panel width 3.5mm. Priced per metre...
View Product

Cab_1m_RJ45

1m RJ45 cable for the Ethernet devices from Teracom...
View Product

CabU_1m_RJ11

1-Wire interface cable with RJ11 connectors. Cable length 1m. The CabU_1m_RJ11 cable can also be used to add one of the 1-Wire sensors with screwless terminals to a network by using the SPL2_RJ11 cable...
View Product

CAL-CAL

500ml Bottle of 1000 ppm Calcium Stock Solution for Dilution...
View Product

CAL-CAL-10

500ml Bottle of 10 ppm Calcium Stock Solution for Direct Calibration...
View Product

CAL-CAL-100

500ml Bottle of 100 ppm Calcium Stock Solution for Direct Calibration or diluted in a 9:1 ratio with Deionised water to prepare a 10ppm solution...
View Product

CAP-K-G1.5-3

Air Temperature probe with clamp 1.5m PTFE coated, triple insulated cable. Suitable for use with all substrate materials..
View Product

CDOM-CAL-600

600ml bottle of CDOM calibration solution. (For point 2 CDOM calibration)...
View Product

CEM-20

The CEM20 is the Channel Expansion Module for DT80 and DT85 data loggers Series 2 and above. This allows a further 60 single ended inputs (voltage, current or Thermocouple) or 20 fully differential inputs (PT100 or bridge) to be added to the DT80 or DT85. One full analogue input channel..
View Product

CHL-CAL

500ml Bottle of 1000 ppm Chloride Stock Solution for Dilution...
View Product

CHL-CAL-10

500ml Bottle of 10 ppm Chloride Stock Solution for Direct Calibration...
View Product

CHL-CAL-100

500ml Bottle of 10 ppm Chloride Stock Solution for Direct Calibration or diluted in a 9:1 ratio with Deionised water to prepare a 10ppm solution...
View Product

CRYO-IFC300

Cryotemp USB Download interface. Supplied with software, manual, docking station and USB connection cable...
View Product

DBBSS/TSF Torque & Tension Load Cell

Stainless Steel combined Torque and Axial Forces Load Cell. Ranges 1kN to 250kN, output 1.5mV/V to 3.0mV/V (refer to datasheet), accuracy 0.05%, sealed to IP65...
View Product
DFK - Duct Fixing Kit

DFK

Duct Fixing Kit (DFK). Kit includes 2m of 6mm i/d plastic tubing, 2 x pitot tubes and 4 fixing screws. The pitot tubes are cut at a 45° angle to allow it them to take static and dynamic air flow pressures...
View Product
DMI810 Serial Touchscreen Single Axis Inclinometer

DMI815-15-RS232

DMI815 Series Single Axis Inclinometer with touchscreen display for single axis readings. Range ±15° with an accuracy of 0.005° and 0.001° resolution. Built-in rechargeable battery suitable for up to 11 hours standalone operation from 3-4 hours charging, or infinite operation when powered (9-36vDC) by the wired connection. The RS232 connection..
View Product

DMI820-15-RS485

DMI820 Series Dual Axis Inclinometer with touchscreen display for X-axis and Y-axis readings. Range ±15° with an accuracy of 0.005° and 0.001° resolution. Built-in rechargeable battery suitable for up to 11 hours standalone operation from 3-4 hours charging, or infinite operation when powered (9-36vDC) by the wired connection. The RS485..
View Product

DMI825-15-RS232

DMI825 Series Dual Axis Inclinometer with touchscreen display for X-axis and Y-axis readings. Range ±15° with an accuracy of 0.005° and 0.001° resolution. Built-in rechargeable battery suitable for up to 11 hours standalone operation from 3-4 hours charging, or infinite operation when powered (9-36vDC) by the wired connection. The RS232..
View Product

DO-25

25ml DO Filling Solution for Galvanic DO Probes...
View Product

CONTACT US

8:30am to 5pm Monday to Thursday
8:30am to 3pm on Friday.

  • +44 (0) 1382 443000
  • info@omni.uk.com

A real person will answer the phone and deal with your enquiry.
You can also click the button below and fill in our online enquiry form.

Technical Sales

links

  • About
  • Contact
  • Custom Systems
  • Privacy & Cookies
  • Terms & Conditions

omni instruments

Omni Instruments Ltd,
Unit 1, 14 Nobel Road,
Wester Gourdie Industrial Estate,
Dundee, DD2 4UH, UK

Sales & Support

  • +44 (0) 1382 443000
  • info@omni.uk.com

Payments

mastercard-color
visa-color
amex-color
Copyright Omni Instruments 2026 | Design. Build. Host.

        We are here to help

        Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.

        Call us on +44 (0)1382 443000