8032204022
N322 Electronic Thermostat for Cooling/Heating Control with Single SPDT Relay Output, Max 250vAC @ 16A. Direct Switching of compressor or electrical heater with simple ON/OFF control and a second SPST-NO Relay (Max 250vAC @ 3A) suitable for additional control or alarm. Accepts Thermocouple (Type J, K or T) Input. Measurement..
820KCG00DK
N20K48 Dock Accessory. Dock attaches to the back of the N20K48 Modular Controller and can hold up to 8 'Size 1' ClickNGo Modules, 4 'Size 2' ClickNGo Modules and 2 'Size 4' ClickNGo Modules...
825-170
RFX Meat Thermometer. Includes the following: 1 RFX Meat Thermometer, Thermometer Charging Block and Probe Rings...
877163
Stainless Steel Protective Cover for Next Generation 40/40 SharpEye Flame Detectors. Protects the detector from extreme weather conditions, such as heavy snow and heavy rain...
8803116430
RHT-DM-485-LCD 150mm Duct Mounted Temperature and Relative Humidity Transmitter with LCD Display and RS485 Modbus Output. Readings for Air temperature, Relative humidity and calculated Dew point values. Display can show two values, or temperature on its own. Temperature Range: -40 to +100°C, Relative Humidity Range: 0 to 100%RH and Dew..
8804111000
RHT Climate-DM-150S Duct Mounted Temperature and Relative Humidity Transmitter with 150mm Stainless Steel Probe. Two analogue outputs, configurable as 4-20mA or 0-10V for any sensor or calculated psychromatic readings. Two configurable alarm outputs. Temperature Range -40 to +100°C, Relative Humidity Range 0 to 100%RH. Power Supply 12 to 32vDC. USB..
8807000000
TxIsoPack programmable 2-wire isolated head mounted temperature transmitter. Suitable for Thermocouples (Type J, K, T, E, N,R, S, B), PT100 (2,3 or 4-Wire) and 0-50mV inputs with configurable 4-20mA or 20-4mA output. Integrated mini USB port for configuration of input type and output range. The TxIsoPack is suitable for head..
8812190950
Colour 2.4" HMI display for FieldLogger data logger for local indication or configuration. Allows parameter checking and configuration plus shows current values, historical charts and indicates status and alarms information. Local or remote installation with RS485 communication...
95.0010
MiniWater 20 Micro vane anemometer. Flow velocity range 0.04-5m/s with accuracy ±2% of full scale, ±3.5% of reading. Sensing head 11mm diameter x 15mm, probe length 165mm. Sensor is supplied with 1.8m cable and connector for interfacing with MC20 and MC 4.0 Displays with Lemo Connectors. Plastic sensing head with..
95.0384
MiniAir20 EEX Micro Vane Anemometer. Plastic measuring head, designed as a snap-on head with aluminium vane and shaft. Suitable for media temperatures up to 140°C. Range 0-20m/s with a ±1.0% FS accuracy. Probe head dimensions 11mm diameter x 15mm with a probe length of 165mm and 1.8m cable with connector..
97.0014
Type 454 wind anemometer complete with analogue indicator and 15m cable. Range 0-100 Km/h..
ACC-01
12 Pin female Lumberg connnector for the analogue outputs...
ACS-0020
Replacement Standard Rogowski Coil (85mm loop diameter). Can be used with any of the Tinytag Energy Logger...
ACSRF-4030-PK-A
Tinytag Radio Receiver Unit complete with software, USB cable. Internal buffer memory for up to 45 hours, 90mm stub antenna user replaceable akaline battery size AA (x2) powered via the USB port, Operational temperature range: -15 C to +60 C, Waterproof IP67 housing, dimension 140 x 155 x 80mm (including..
AMM-CAL
500ml Bottle of 1000 ppm Ammonium Stock Solution for Dilution...
AMM-CAL-10
500ml Bottle of 10 ppm Ammonium Solution for direct calibration...
AMM-CAL-100
500ml Bottle of 100 ppm Ammonium Solution for direct calibration or diluted in a 9:1 ratio with Deionised water to prepare a 10ppm solution...
AP-Lite Aquaprobe Package
The pocket sized Aquaprobe is designed to measure a single parameter, it consists of a small body with an optical electrode socket. Each sensor can be connected to any one of 8 of the optical electrodes available, which can be simply connected and disconnected as required. Available electrodes cover Turbidity,..
Aquatel Telemetry Leveline
Aquatel Telemeter Leveline is a Smart telemetry device designed for use with the Leveline range of water level probes. Constructed with carbon fiber and Aluminium, 2-year battery life (15 min logging and once a day upload. 4G modem communications. Leveline sensors used with this device can gain automatic compensation for..
AQUATEL-LEVELINE
AQUATEL-LEVELINE is a Smart telemetry device designed for use with the Leveline range of water level probes. Constructed with carbon fiber and Aluminium, 2-year battery life (15 min logging and once a day upload. 4G modem communications. Leveline sensors used with this device can gain automatic compensation for barometric pressure..
AQUATEL-PROBE
AQUATEL-PROBE is a Smart telemetry device designed for use with the Aquaprobe & PRO range of water quality probes. Constructed with carbon fiber and Aluminium, 2-year battery life (15 min logging and once a day upload. 4G modem communications. Aquaprobe or Aquasonde sensors used with this device can gain automatic..
AV-EP Multi-point Air Velocity Probes
AV-EP Multi-point Air Velocity Probes (ABS probe) insertion length 100 to 600mm. Suitable for use in flat, round and oval ducts. These probes are not suitable for turbulent airflows...
B-564
20 channel input terminal, multi-input type. Suitable for the GL840-M data logger...
B104412
Wireless Master Receiver. 2.4GHz, Modbus output, repeater function. Suitable for up to 49 OLCT80 Wireless Transmitters with direct PLC connection, Max 32 when used with MX43 controller...
