Skip to content

omni instruments | sensors and data acquisition equipment

Sales & Technical Support

  • +44 (0) 1382 443000
  • info@omni.uk.com
  • Home
  • Custom Systems
  • System Hires
  • About
  • Contact
  • Home
  • Custom Systems
  • System Hires
  • About
  • Contact
Products
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
  • Home
  • Custom Systems
  • System Hires
  • About
  • Contact
  • Home
  • Custom Systems
  • System Hires
  • About
  • Contact
Need Help?
£0.00 0 Basket
Product
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
£0.00 0 Basket
Home / Displacement & Position Sensors / X101 Intrinsically Safe Linear Position Sensor
X101 Intrinsically Safe Linear Position Sensor

X101 Intrinsically Safe Linear Position Sensor

The X101 is an ATEX approved, Intrinsically Safe stand alone linear position sensor that is suitable for use in hazardous areas with potentially explosive gases or vapours. The X101 units are supplied with a ratiometric 0.5-4.5vDC output, calibrated to any travel distance between 50 and 600mm, and full EMC protection built in. The sensors are very robust, the body and push rod are stainless steel, which provides a long service life and environmental resistance. The sensors are easy to install with various mounting options, the push rod can be supplied free or captive and environmental sealing is to IP65 or IP67, depending on selected cable or connector options.

View Options

Need help finding the right product?

CONTACT US
  • Description

Description

Specification

Specification 
Dimensions
Body Diameter
35mm
Body Length (Axial Version)
Measurement length + 163mm
Body Length (Radial Version)
Measurement length + 186mm
Push Rod Extension
Measurement length + 9mm

Push Rod Outside Diameter

9.45mm

Travel

any stroke from 50 mm to 600mm (eg 305mm)

Independant Linearity

<±0.25% up to 450mm <±0.50% over 450mm at 20°C

Temperature Coefficient

<±0.01%/°C Gain & <±0.01%FS/°C Offset

Resolution

Infinite

Noise

<0.02% FSO

Frequency Response

>10KHz (-3dB);

Output Signal

0.5-4.5vDC Ratiometric

Temperature Limits

 

Operating

-40 to +80°C

Storage

-40 to +125°C

EMC Performance

 

Susceptibility

EN 61000-6-2

Radiated

EN 61000-6-3

 

 

Vibration

IEC 68-2-6: 10g

Shock

IEC 68-2-29: 40 g

MTBF

350,000 hrs 40°C Gf

Sealing

IP65(connector) / IP67(cable)

Electrical Connections

Screened 3 core cable with 0.25 mm² conductors or integral connector

Product

Ref

Price

Product Description

X005-425

£411.00

X005-425 Galvanic Isolation Amplifier for use with Intrinsically Safe Position Sensors coded Z000. Power supply 12-30vDC. The X005 Galvanic Isolation Amplifier provides a regulated and resistively limited 5vDC power supply to the sensor and amplifies the returned ratiometric output to a factory configured 4-20mA output. Tri-port isolation between power supply, hazardous area and output signal. ATEX and IECEx approved.
MORE INFO
Add to basket

X005-426

£411.00

X005-426 Galvanic Isolation Amplifier for use with Intrinsically Safe Position Sensors coded Z000. Power supply 12-30vDC. The X005 Galvanic Isolation Amplifier provides a regulated and resistively limited 5vDC power supply to the sensor and amplifies the returned ratiometric output to a factory configured 20-4mA output. Tri-port isolation between power supply, hazardous area and output signal. ATEX and IECEx approved.
MORE INFO
Add to basket

X005-545

£411.00

X005-545 Galvanic Isolation Amplifier for use with Intrinsically Safe Position Sensors coded Z000. Power supply 12-30vDC. The X005 Galvanic Isolation Amplifier provides a regulated and resistively limited 5vDC power supply to the sensor and amplifies the returned ratiometric output to a factory configured 0.5-9.5vDC output. Tri-port isolation between power supply, hazardous area and output signal. ATEX and IECEx approved.
MORE INFO
Add to basket

X005-546

£411.00

X005-546 Galvanic Isolation Amplifier for use with Intrinsically Safe Position Sensors coded Z000. Power supply 12-30vDC. The X005 Galvanic Isolation Amplifier provides a regulated and resistively limited 5vDC power supply to the sensor and amplifies the returned ratiometric output to a factory configured 9.5-0.5vDC output. Tri-port isolation between power supply, hazardous area and output signal. ATEX and IECEx approved.
MORE INFO
Add to basket

X101 Intrinsically Safe Linear Position Sensor

X101 Intrinsically Safe Linear Position Sensor for Hazardous Gas Atmospheres. Range: Any distance from 50 to 600mm. Galvanic Isolation Amplifier with -0.5 to 9.5vAC or 4-20mA outputs with cable length up to 1,000m. Electronics sealed to IP65 (connector)/IP67 (cable). The sensor is ATEX/IECEx approved to II 1G Ex ia IIC T4 GA (Ta = -40°C to +80°C).
MORE INFO
Read more

links

  • About
  • Contact
  • Custom Systems
  • Privacy & Cookies
  • Terms & Conditions

omni instruments

Omni Instruments Ltd,
Unit 1, 14 Nobel Road,
Wester Gourdie Industrial Estate,
Dundee, DD2 4UH, UK

Sales & Support

  • +44 (0) 1382 443000
  • info@omni.uk.com

Payments

mastercard-color
visa-color
amex-color
Copyright Omni Instruments 2026 | Design. Build. Host.

We are here to help

Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.

Call us on +44 (0)1382 443000

Enquire now