Tango TX2 Two Gas Detector for Carbon Monoxide (CO), Range 0-1000 ppm in 1ppm increments & Carbon Monoxide (CO/H2 Low), Range 0-1,000 ppm in 1ppm increments (Two electrodes and a special catalyst with a lower sensitivity to Hydrogen). Alarms: Audible 100dB, vibration and three strobe-emitting visual LEDs. Internal logging for 3 months at 10 second interval plus 60 alarm events. The replaceable internal battery is suitable for up to 2 year continuous monitoring. Lightweight (126g), IP66 Polycarbonate housing, Dimensions 99 x 51 x 35mm. Operating temperature -40 to +50°C. EMEA/APAC Version.
£560.00
| Gas Detected: | Carbon Monoxide (CO) | Carbon Monoxide with Low Hydrogen Cross-Sensitivity(CO/H2 Low) |
| Sensor Type: | Electrochemical | Electrochemical |
| Measuring Range: | 0-1,000ppm | 0-1,000ppm |
| Resolution: | 1ppm | 1ppm |
| Response Time (T50): | 12 Seconds | 9 Seconds |
| (T90): | 20 Seconds | 18 Seconds |
| Operating Temp: | -40 to +50°C | -20 to +50°C |
| Operating RH: | 15-90% | 15-95% |
| Calibration Gas: | 100ppm CO | 100ppm CO |
| Replacement Sensor: | 17160204 | 17160208 |
| Display: | Segment Liquid Crystal Display (LCD) |
| Alarms: | 3 Strobe-Emitting LEDs (2 Red; 1 Blue) Vibration Alarm Audible 100dB |
| Certification: | ATEX, CSA, IECEx, INMETRO, UL (C-US), China Ex, CMA, EAC & KC. |
| Operating Conditions: | -20 to +50°C, 15-95% RH (non-condensing) |
| Enclosure: | Polycarbonate with Rubber Overmould on top, Conductive Polycarbonate on bottom. |
| IP Rating: | IP66; IP67 |
| Battery Pack: | Replaceable 3.6V Lithium-thionyl Chloride 1.5Ah. |
| Dimensions: | 99 x 51 x 35mm |
| Weight: | 126g |
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
