Description
The Tango TX1-1 is a compact, single-gas monitor designed for reliable and continuous detection of Carbon Monoxide (CO) in various industrial and commercial environments. Engineered for user-friendliness and durability, this device provides essential protection for workers by issuing clear alarms in the presence of dangerous CO levels. Its robust design and straightforward operation make it an ideal solution for personal safety monitoring where CO exposure is a potential hazard.
Features
- Single gas monitors for Carbon Monoxide
- Two button keypad
- Segment LCD shows real time value
- Three strobe-emitting visual alarm LEDs (two red; one blue)
- 100dB audible alarm at a distance of 10 cm 110dB with optional AlarmAmp
- Vibration alarm
- DualSense Technology for improved reliability.
- Guaranteed for Life with replaceable sensors and batteries that extends the life of the instrument
Tango TX1-1 Sensor Specifications
Gas Detected: | Carbon Monoxide (CO) |
Sensor Type: | Electrochemical |
Measuring Range: | 0-1,000ppm |
Resolution: | 1ppm |
Response Time (T50): | 12 Seconds |
(T90): | 48 Seconds |
Operating Temp: | -40 to +50°C |
Operating RH: | 15-95% |
Calibration Gas: | 100ppm CO |
Replacement Sensor: | 17155161 |
Tango TX1 Technical Specification
Display:
|
Segment Liquid Crystal Display (LCD)
|
||
Alarms:
|
3 Strobe-Emitting LEDs (2 Red; 1 Blue) Vibration Alarm Audible 100dB |
||
Operating Conditions: | -20 to +50°C, 15-95% RH (non-condensing) | ||
Enclosure: | Polycarbonate with Rubber Overmould on top, Conductive Polycarbonate on bottom. | ||
IP Rating: | IP66; IP67 | ||
Battery Pack: | Replaceable 3.6V Lithium-thionyl Chloride 1.5Ah. | ||
Dimensions: | 99 x 51 x 35mm | ||
Weight: | 126g |
The TX1-G is the recommended alternative to the TX-1, if the gas detector is being used in environments where Hydrogen gas could be present. The TX1-G includes the CO/H2 Low cells which includes two electrodes and a special catalyst with a lower sensitivity to Hydrogen and prevents incorrect readings.