The Senturion XPR02 proximity probe system is a 5mm tip proximity sensor that uses eddy current principle to measure distance up to 2.5mm with resolution of less than 1 micrometer. It is designed for tight installation and harsh environments (up to 180°C). The system includes a driver unit with a 5, 7, or 9m extension cable. The cable system incorporates snap lock connectors and double screened cable for easy installation and high immunity to interference.
The Senturion XPR02 proximity probe system is a type of proximity sensor that uses the eddy current principle to measure the distance between the probe and a target. The probe has a small, 5mm tip that is made of a conductive material. When the probe is brought close to the target, an eddy current is induced in the target material. The strength of the eddy current is proportional to the distance between the probe and the target. The driver unit converts the eddy current signal into a voltage output that is proportional to the distance.
The XPR02 proximity probe system is designed for tight installation applications. It has a range of up to 2.5mm and a nominal sensitivity of 7.87mV/µm. This means that it can accurately measure distances of up to 2.5mm with a resolution of less than one micrometer. The system is also designed for harsh environments and can operate up to 180°C.
| Measurement Range: | 0.0mm to 2.5mm |
| Linearity of Full Scale: | ±1% -1 to -19V |
| Sensitivity: | 7.87mV (200mV/mil) ±1% |
| Resolution: | <0.001mm |
| Available System Lengths: | 5m, 7m or 9m. |
| Frequency Response: | DC to 10kHz |
| Probe Tip Diameter: | 5.0mm |
| Probe Tip Material: | PPS 40% Glass Filled |
| Probe Body Material: | Stainless Steel |
| Available Body Lengths: | 20mm to 250mm (in 10mm increments) |
| Cable Type: | Triaxial 75Ohm Coaxial, FEP Outer Jacket 3.2mm diameter |
| Armoured Option: | Convuluted Stainless Steel 6.4mm diameter |
| Operating Temperature: | -40 to +180°C |
| Minimum Target Diameter: | 10mm |
| Connector: | Female Miniature Coaxial |
| Linear Voltage Range: | -1V to -19V for 0.254mm to 2.54mm |
| System Length Indication: | Green LED Lamp |
| Power Supply Range: | -16vDC to -28vDC (1.2V above output voltage) |
| Power Consumption: | 3mA typ. Max 7mA |
| Sensor Connector Type: | Self Locking Miniature Male Coaxial |
| Monitor Connector Type: | 3.5mm Audio Jack |
| Mounting: | DIN Rail or Plate |
| Weight | 250g |
| Operating Temperature: | -40 to +90°C |
Pricing for the XPR02 are only available on request. Please contact us for a quotation, info@omni.uk.com. Options are shown on the product datasheet.
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
