WDM8000 Wireless Data Modem with FFSK modulation. UHF Radio Frequency: 400-470MHz. 127 channels with 12.5, 20 or 25KHz channel spacings in any PMR frequency band. Selectable 0.5, 1, 3 or 5 Watt transmitter power. Receiver sensitivity 107dBm 19,200 version FFSK. Power Supply: 16 to 55vDC (2.0A Max transmit) Standby 70mA. SMA male antenna connector. DB25 male connector. Dimensions 179 x 69 x 37mm. Weight 428g. Operating Temp -25 to +55°C.
£666.38
The WDM8000 Wireless data modem is designed for data transmission of RS232 serial data or 4 digital and analogue I/O channels. The WDM8000 is built into a robust IP54 Aluminium housing with DIN rail or surface mounting options and SMA connector for the antenna connection. Programming of parameters, including channel configuration, radio frequencies, power output, etc is done using a standard PC, the dedicated software and built in RS232 interface. Once the simple configuration procedure is completed, the units will be ready for transmitting and receiving data. The RE8WDM12/7F2 features programmable UHF radio frequencies in the range of 400-470MHz and selectable RF power of 0.5W to 5W.
| Frequency UHF: | 400 to 470MHz |
| Channel spacing: | 12.5 / 20 / 25 kHz |
| No. of channels: | 127 Channels |
| Type of emission: | 16K0F1D/10K1F1D |
| Communication mode: | Simplex/Half-Duplex |
| Mode of operation: | Simplex / Semi-duplex |
| TX Output power: | Selectable 500mW, 1W, 3W or 5W / 50 Ohms |
| RX Sensitivity: | -107 dBm 19,200 Vers. 4 Level FSK (BER <10 E-4) |
| Adjacent channel selectivity: | >70dB at 25kHz >60dB at 12.5kHz |
| Operating voltage: | 16 to 55vDC |
| Power consumption: | 70mA Standy, 2.0A max (transmit, 5 Watt) |
| Antenna connector: | SMA male, 50 ohm. |
| Temperature range: | -25°C to +55°C |
| Dimension: | H: 179 x W: 69 x D: 37 mm |
| Weight: | 428 g |
| Construction: | Aluminium Enclosure (IP54) |
| Interface: | RS232 with DB25 male connector |
| Data speed of RS interface: | 300 – 115.200 bps (buffer 1Kbit) |
| Data speed of radio interface: | 19,200bps (25kHz channel) 14,400bps (12.5kHz channel) |
| Data formats | Asynchronous Data |
The WDM8000 comply to the 1999/5/EF directive. The concerned standards are EN300 086, 300 113 & 300 279. CE approved according to EC directive 89/336/EEC.
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
