PL-692-0.4 differential pressure transmitter suitable for liquids, steam and gases. Pressure range 0-400mBarD over a 4-20mA output with 11-33vDC power supply. IP65 stainless steel casing with a pair of 6mm compression pressure connection, ceramic Al2O3 (96%) diaphragm and 1.5m flying lead. Operating temperature range -15 to +85°C.
£341.27
The PL-692-0.4 is a robust and accurate differential pressure sensor with a 0-400mBar range. A ceramic pressure sensor for stable and reliable measurements in liquid and non-aggressive gas applications. Its stainless steel IP65 housing ensures durability, with 4-20mA output options and easy installation via 6mm CuZn Nickel plated compression fittings and a 1.5m cable. The PL-692 is ideal for monitoring small pressure differential pressures across pumps, valves or filters and general low differential pressures across a wide temperature range.
| Pressure Ranges: | 0 to 400mBar |
| Supply Voltage: | 11 to 33vDC |
| Outputs: | 4-20mA |
| Accuracy: | ±0.005 Bar |
| Long Term Stability: | ±0.002 Bar |
| Response Time: | <5ms |
| Burst Pressure: | 2 Bar Overload Pressure |
| Materials in Contact: | Ceramic/Stainless Steel 1.4305 with the medium EPDM seal |
| Pressure Connection: | 6mm Compression, CuZn Nickel Plated |
| Operating Temp: | -15 to 85°C |
| Dimensions: | 130 x 40mm |
| Protection: | IP65 |
| Conformity: | EMC, CE & UKCA Marked |
For differential pressure measurement at high line pressure, it is recommended that the pressure sensor should be installed with a valve in each line plus a shunt (bypass) valve across the high (P1) and low (P2) pressure ports. This ensures that any potential overload on either P1 or P2 doesn’t exceed the maximum permitted.
Valve C should be open and valves A & B closed whenever the system is first being wetted or pressurised. Valves A & B should then be
opened slowly to avoid hammering. Valve C can then be closed and the system is operating.
If the pressure sensor is to be removed from the system, valve C must be opened first, the valve A & B can then be closed.
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
