Downloads

Datasheet

MX16 Gas Control Panel

Description

The Easy Duo pack includes an MX16 controller, OLCT10N detector for O₂ (Oxygen) and fitted with 10 metre cable. The MX16 controller comes pre-configured from the factory. So, you don’t need to get any configuration software for the installation. The OLCT10N’s use a specific RS485 for digital communication and can be replaced without the need for reconfiguration.

Features

  • Single channel gas controller
  • Easy Duo pack comes with MX16 controller and OLCT10N gas detector
  • OLCT10N detector with 10m of cable.
  • Low Cost and Easy to Install
  • Integrated Relays
  • Easy to read large graphic and multi-language LCD back-lit display
  • Soft-touch Keys for Embedded Menus

Applications

  • Monitoring levels of Oxygen in enclosed areas.
  • Gas Leaks in Boiler Rooms
  • Gas Releases in Battery Charging Areas
  • Water Water Treatment Plants
  • Petrochemical Industry
  • Laboratories

Specifications

General Specifications

Dimensions: 265 x 266 x 96mm
Ingress protection IP55
Cable entries:

 

 3 M16 cable glands, 4 to 8 mm² (8 to 11 AWG) outer diameter cable
2 M20 cable glands, 6 to 12 mm² (7 to 9 AWG) outer diameter cable
Display:

 

 LCD back-lit display + smart keys
Display in grayscale in case of fault
Bar graph with alarm threshold
Visual indicators: 6 LEDs, 5 LEDs for Detector Status Line, 1 LED fault indicator and 1 LED Power Condition
Buttons: 5 smart keys, 1 audible alarm accept/reset button
Operating Environment: Temp: -20°C to +50°C, Humidity 5 – 95%RH
Power Supply: 100-240vAC 50-60 Hz (35W)
Consumption: 250 mA max (without captor)

Alarms

Per channel:
 2 alarm levels (AL1 and AL2) + negative drift fault
Accessible and modifiable alarm threshold Al1 and Al2, manual acknowledgement
On-board relays:

 

 2 alarm relays
1 fault relay (non-configurable)
Dry Contact Relay, RCT, 250vAC, 5A

 

OLCT10N Gas Detector

The OLCT10N is a digital gas detector designed for detection of the most common gases in commercial and light industrial applications. The OLCT10N is IP65 and ATEX 3 GD certified, for use in ATEX 2 and 22 zones, and is water- and dustproof.

Gas Detected: O2 (Oxygen)
Range: 0-30% Volume (-40 to +50°C)
Output:
 RS-485 Modbus communication, proprietary protocol, 9600 Baud
Cable: Fitted with 10m, 2 twisted shielded-pair cable
Dimensions (L x H x W): 118 x 110 x 60mm
Enclosure: IP65, ABS enclosure, UV and shocks resistant
Approvals:

 

 II 3 GD – IECEx 11.0029X
Ex nA IIC T4 Gc
Ex tc IIIC T135°C Dc
-20°C<Ta<+55°C
Electromagnetic compatibility according to EN50270