MX16 Gas Detection Controller configured for 4-20mA Analogue Input Gas Detector. Pre-Configured for Carbon Dioxide (CO2) with a range of 0-5% Volume. RS485 Modbus Comms, 2 Alarm levels (Al1, Al2) + 1 fault, with Dry Contact Relays. LCD back-lit display. IP55 Enclosure with 3 x M16 and 2 x M20 cable glands. Dimensions 265 x 266 x 96mm.
The MX16 is delivered alone and does not include a detector. WCDCOM16 Software Pack allows for re-configuration.
£700.00
The MX16 controller comes pre-configured from the factory to accept a 4-20mA signal from a suitable CO2 gas detector. The MX16 can provide a 24vDC supply to the gas detector.
| Dimensions: | 265 x 266 x 96mm |
| Ingress protection | IP55 |
| Cable entries:
|
3 M16 cable glands, 4 to 8 mm² (8 to 11 AWG) outer diameter cable 2 M20 cable glands, 6 to 12 mm² (7 to 9 AWG) outer diameter cable |
| Display:
|
LCD back-lit display + smart keys Display in grayscale in case of fault Bar graph with alarm threshold |
| Visual indicators: | 6 LEDs, 5 LEDs for Detector Status Line, 1 LED fault indicator and 1 LED Power Condition |
| Buttons: | 5 smart keys, 1 audible alarm accept/reset button |
| Digital Output: | RS485 Modbus communication, proprietary protocol, 9600 Baud |
| Operating Environment: | Temp: -20°C to +50°C, Humidity 5 – 95%RH |
| Power Supply: | 100-240vAC 50-60 Hz (35W) |
| Consumption: | 250 mA max (without captor) |
| Per channel: |
4 alarm levels (A1, A2, A3, Overscale, Underscale) + 1 Fault |
| Programmable thresholds: | Instantaneous or averaged values, falling alarms, manual or automatic acknowledgement |
| On-board relays:
|
2 alarm relays 1 fault relay (non-configurable) Dry contact relay Dry Contact Relay, RCT, 250vAC, 5A |
| Digital output: | RS485 Modbus RTU Comms |
| Gas Detected: | CO2 (Carbon Dioxide) |
| Range: | 0-5% Volume |
| Power Supply: |
24vDC |
Please ensure that local regulations are adhered to when installing detectors to the MX16 control panel, with suitable circuit breakers or barriers for the installation. The MX16 controller must be installed in a safe area.
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
