omni instruments | sensors and data acquisition equipment

Sales & Technical Support

Edit Content

LOWPROVHF

Low profile VHF antenna, waterproof body mount, 40mm x 280m x 420mm, vertical/horizontal mounting, 5m of RG5U cable

£113.60

Need help finding the right product?

Description

The two major wavelengths used for point to point, or vehicle to base station are VHF (Very High Frequency) and UHF (Ultra High Frequency). Both types of radio signals can reach great distances, but each can be affected by the environment and obstacles. There are also other aspects to consider, including how the two affect antenna size and power requirements.

VHF’s frequency range is from 30 MHz to 300 MHz. VHF is less affected by atmospheric noise and interference from electrical equipment than lower frequencies. VHF radios are more power efficient but require a larger antenna than UHF radios. VHF radio transmissions suffer from signal degradation due to barriers in the landscape. These barriers can range widely from mountains, hills, trees, and even buildings. This reduces the range of VHF radios greatly, especially in urban locations.

Ideal applications are rural or marine applications with clear line of sight between locations with a low power requirement. Common uses for VHF transmission are two way land mobile radio systems, long range data communication of up to several tens of kilometres, radio modems, amateur radio, and marine communications.

The low profile antenna in this section is ideal for mounting to vehicles or fixed point station use. These VHF antennas do not require a ground plane and are fully waterproof. The antenna may also be mounted horizontally or vertically depending on your requirements. These antennas are ideal for a wide variety of different applications and can be easily incorporated to ABS and Steel enclosures for remote data logging applications.

Specifications

Frequency VHF
Polarity Vertical or horizontal
Gain 2 dbi
VSWR 1.5 to 1
Dimensions 40 x 280 x 420mm
Cable 5m of RG58 (others on request)
Connector as per requirements
Power 35 Watts
Impedance 50 Ohms

 

Standard cable is fitted with an SMA connector but any standard radio antenna connectors can be fitted on request and the standard 5m cable can be amended to suit.

 

We are here to help

Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.

Enquire now