LEO3 Digital Manometer with programmable 4-20mA output and RS485 communications. The LEO 3 displays both the current pressure reading and the output signal value. Pressure range -1 to 3 Bar, accuracy of 0.1%. Pressure connection ¼” BSP male connection, operating temperature 0 to 50 C and IP65 casing. Manometer is loop powered with a 8-28vDC power supply range on the 2 wire 4-20mA output. Units are supplied with a 5 pin Binder mating connector.
£470.00
LEO3-3BAR-1/4BSP Digital Manometer with scaleable 4-20mA output, RS485 interface and free Keller software. The LEO3 displays both the current pressure reading and the output signal value. Pressure range -1 to 3 Bar, accuracy of 0.1%. Pressure connection ¼” BSP male connection and IP65 casing. Manometer is loop powered with a 8-28vDC power supply range on the 2 wire 4-20mA output. Units are supplied with a 5 pin Binder mating connector.
| Pressure Range | -1 to 3 Bar |
| Over Pressure | 12 Bar |
| Display Resolution | 0.001 Bar |
| Units of Pressure Options | Bar, mBar, hPa, kPa, MPa, PSI, kp/cm² |
| Accuracy | ±0.1 %FS (including non-linearity, repeatability and hysteresis) ±0.2 %FS (including compensated pressure and temperature range) |
| Storage/Operating Temperature | -20…70°C / -10…60°C |
| Compensated Temperature Range | 0…50°C |
| Protection | IP65 |
Power Supply: 8-32vDC @ 3.5-22.5mA
Analogue Interface: 4-20mA (Note: unstable when Serial Comms are active)
Digital Interface: RS485
Start-up Time: Less than 300ms after Power Supply On.
Digits: 7-Segment 4½ Digit Display
Display Mode: Pressure and Min/Max or Analogue Output Signal
Display Interval: Twice per second
‘PressureSuite Desktop’ Windows software for reading and configuring the LEO 3 manometers. With ‘live data’, a connected device can record directly to the PC. Selected measurement data can be graphically displayed and exported.
The full range of LEO3 Digital Manometers can be found on the product list below.
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
