HygroClip 2. HC2A-IM102-M Stainless Steel Industrial Probe. Range 0-100%RH and -100 to +200°C, Accuracy ±0.8% RH, ±0.1°C. 15mm diameter PPS Probe with Stainless Steel 1.4301 tip with Hygromer HT-1 Sensor, 86mm (130mm with filter carrier) probe length and 2m cable to a 7 pin UART interface. Power Supply 3.3vDC ±0.1V @ 4.5mA. Two 0-1V Outputs for °C and %RH. Not suitable for use with 2-Wire Transmitters.
£1,162.00
The HC2A-IM industrial probe is suitable for high temperature, demanding industrial environments and areas where hygiene plays an important role. The probe measures humidity and temperature and can calculate the dew/frost point with configurable 0-1V outputs for two parameters.
Food and pharmaceutical production, drying processes, industrial manufacturing.
| Temperature limits at sensor: | -100…200°C (-148…392°F) |
| Humidity measuring range: | 0…100%RH |
| Accuracy: | ±0.8%RH, ±0.1 K @ 23°C |
| Diameter barrel: | 15 mm (0.6”) |
| Length (probe head): | 120 mm (4.7”). |
| Cable length: | 2 m (6.5 ft) |
| Housing material: | Stainless steel, DIN 1.4301 (probe head) |
| Standard filter: | None, must be ordered separately |
| Sensor: | HYGROMER® HT-1 |
| Weight: | 310 g / 10.9 oz |
HC2A-IMxxx-M probes are the same as HC2-IMxxx but are equipped with a stainless steel connector instead of PPS.
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
