Downloads
Description
Features
- Calibrated plug and play solution
- Measurement of U-Value (W/(m²K)), heat flux (W/m²), and 2 temperatures (°C)
- Compatible with standard ISO 9869 and ASTM C1046/ASTM C1155
- Stores up to 2 million data points
- Rechargeable battery
- Battery lifetime >1 month
- High sensitive thermal detectors
- Free readout software supplied with each kit
- Compact design
- USB interface
U-value is used to show the amount of heat loss in a building element such as a wall, floor or roof. It is also referred to as an ‘overall heat transfer co-efficient’ and provides a measure of how well parts of a building transfer heat. A high U-value indicates a poor thermal performance of the building envelope, whilst a low U-value indicates a high level of insulation. They are used as a way of predicting the composite behaviour of an entire building element rather than relying on the properties of individual materials.
Specifications
| gSKIN Kit | 2615C |
| Heat Flux Sensor | XO677C, (size 30 x 30mm) |
| Heat Flux Range (W/m²) | ±300 |
| Resolutions (W/m²) | <0.11 |
| Temperature Accuracy (°C) | ±0.5 (-10 to +65 °C) ±2.0 (-55…+125 °C) |
| Data Capacity | 2 million readings |
| Operating Temperature Range | -50 to +80°C (-25 to +65°C for data logger) |
| Calibrated Temperature Range | -30 to +70°C |
Each kit is supplied with a logger, heat flux sensor, 2 temperature sensors (1m & 5m cables), mounting tape and necessary software.
