GEN II radio transmitter with wired connections for up to 4 voltage/current inputs. Selectable ranges 0-100mV, 0-1vDC, 0-10vDC, 0-20mA, 4-20mA plus EU scaling configured using DARCA software. The GS-44 can also provide a 5 or 12V sensor supply. Supplied with 4 x AA Alkaline batteries and stub antenna.
£520.00
The GS-44 is a GEN II radio transmitter with wired connections for up to 4 voltage or current inputs. Selectable ranges 0-100mV, 0-1vDC, 0-10vDC, 0-20mA, 4-20mA plus EU scaling configured using DARCA software. The GS-44 can also provide a 5 or 12V sensor supply to power sensors from the internal batteries. The GS-44 is supplied with 4 x AA Alkaline batteries and stub antenna.
| RF specification: | EN300-220 | |
| RF power: | 10mW | |
| Environment specification | ||
| Compliant to EN300-220: | -10 to +55°C | |
| Actual: | -30 to +65°C | |
| Humidity: | 100% non condensing | |
| Environmental rating: | IP40 | |
| Dimensions (footprint): | 78 x 41mm | |
| Battery endurance: | up to 5 years (interval set to 5 minutes, not powering sensors) | |
| Transmission interval range: | 1 sec to 4 hours | |
| Indicator (red LED): | transmit active/on/off | |
| Control switch (concealed): | test mode / hibernate | |
| Antenna socket: | SMA | |
| Model | Input Channels | Range | Resolution | Accuracy |
| GS44
|
4 x external voltage or current
|
0-100mV 0-1VDC 0-10VDC 0-20mA DC 4-20mA DC other ranges available |
0.25mV 2.50mV ~5uA 0.05% |
±0.5mV ±5mV 20uA 0.1% |
The GS-44 provides four inputs, A, B, C and D. Each is a voltage or current input. There is also a sensor supply output on Connector 1 and a sensor supply output or Field-Effect Transistor (FET) switch on Connector 2.
0 – Sensor supply output -ve, or FET switch on Connector 2
+ – Sensor supply output +ve, or FET swtich on Connector 2.
V – Voltage input. (0-100mV / 1V / 10V and EU scaling configured using Darca software)
C – Current input. (0-20mA or 4-20mA and EU scaling configured using Darca software). If current is used, link V to C.
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
