The EL-USB-1-RCG data logger measures and stores up to 32,510 temperature readings over a -20 to +60°C (-4 to +140°F) range. The EL-USB-1-RCG is housed in a stainless steel housing and includes a rechargeable battery. The logger can be simply plugged into a USB port to download the data and recharge the battery. Data can then be graphed, printed and exported to other applications using the free EasyLog software.
The EL-USB-1-RCG is a USB temperature data logger with and internal rechargeable battery. The data logger has a measurement range of -20 to +60°C and can store up to 32,510 readings. The EL-USB-1-RCG is housed in a robust stainless steel housing with good corrosion and impact protection as well as being easier to clean and sanitise for pharmaceutical applications. The data logger is protected against water ingress to IP67 standard when the protective cap is fitted.
| Measurement Range: | -20 to 60°C (-4 to 140°F) |
| Internal Resolution: | 0.1°C (0.2°F) |
| Accuracy: | ±1°C (±2°F) |
| Memory: | 32,510 readings |
| Logging Interval | 1 Sec up to 12 hr (user selectable) |
| Alarm Thresholds: | 2 (user programmable) |
| Start Date/Time: | Selectable in software |
| Power: | 280mAh Lithium Ion Battery |
| Battery Life: | 4 Weeks (20°C @ 1 min logging rate) |
| Dimensions: | 93 x 20mm |
| Charging Temperature Range: | 10 to +30°C (50 to 68F) |
The EL-USB-1-RCG rechargeable temperature data logger is suitable for a wide variety of applications, these include but are not limited to:
The Stainless Steel (316 grade) housing provides a more robust logger and additional protection for harsh environmental conditions in building sites or other outdoor environments. The housing also allows for better sanitation for pharmaceutical and food applications.
The EL-USB-1-RCG is fitted with a 280mAh capacity rechargeable Lithium-Ion battery to provide up to 1 months logging. The logger must be connected to an active USB port to recharge the battery; which may take up to 5 hours, depending on the level of discharge. The battery charge status is indicated by the status LEDs. The red LED indicates that charging is ongoing; the green LED indicates that the battery is fully charged. The battery capacity will reduce over time and the battery will operate best at temperatures of +10 to +30°C (+50 to +86°F) and should be recharged within this temperature range.
The EasyLog USB control software is available as a free download from here. The software is easy to install and use, plus is compatible with 32-bit and 64-bit versions of Windows 7, 8 and 10. The software is used to set up the logger, alarms, download, graph and annotate data or export in Excel, PDF and jpeg formats. It is also possible to set the alarm to remain active, even if the reading has returned to normal, in which case the alarm LED will continue to flash red. This ‘Hold’ feature in the software ensures the user is notified that at some point an alarm level has been exceeded, without needing to download the data.
The software allows the following parameters to be configured:
The link below will take you to the main EL-USB Temperature Data Logger page with various other USB temperature loggers. Including units with display, loggers with external thermocouple inputs and replaceable batteries.
EL-USB-1-RCG
£109.98
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
