Datataker DT82I Series 3 Industrial Data Logger, with 2-6 analogue inputs (universal input type) and 8 flexible digital channels. 2 serial ‘Smart Sensor’ ports suitable for RS232, RS422 and RS485 inputs. The logger has an internal non volatile memory for up to 10,000,000 readings which can be expanded with a USB memory stick. Logging rates 25Hz to 99 days. DT82I can be mains powered via plug in power supply, 10-30vDC external supply, or via internal battery (6V, 1.2Ah lead acid internal battery). Unit is supplied fitted into a portable pelicase with a 7Ah battery, UK power supply and 2 Hirschmann bulkheads for sensor connections. Hire cost per week.
£150.00
The Datataker DT82I smart data logger provides an extensive array of features that allow it to be used across a wide variety of applications. The DT82I is a robust, stand alone, low power data logger featuring USB memory stick support, 18 bit resolution, extensive communications capabilities and built-in display. The Datataker DT82Is Dual Channel concept allows up to 4 isolated or 6 common referenced analog inputs to be used in many combinations. With support for Modbus sensors and SCADA systems, FTP and Web interface and switchable 12V and 5V regulated outputs to power sensors, the DT82I is a totally self contained solution.
Features
Versatile Measurement
Connect an array of sensors through the versatile analog and digital channels, high-speed counter inputs, phase encoder inputs, programmable serial sensor channels and the optional CANgate interface (available for CAN bus applications). Temperature, voltage, current, 4-20mA loops, resistance, bridges, strain gauges, frequency, digital, serial and calculated measurements can all be scaled, logged and returned in engineering units or within statistical reporting. Set up sampling, logging, alarm and control tasks to suit your own requirements while interfaces for smart sensors, GPS and other intelligent devices expand the DT82I flexibility.
Superior Data Storage & Communications
With the standard unit able to store up to 10 million data points (expandable) you can log as much or as little as you need. Overwrite or stop logging once allocated memory is full, archive data on alarm event, copy to USB memory or transfer via FTP, the choice is yours. Communications features include RS232 and Ethernet, connect to the DT82I locally, remotely through a modem or over the Internet. The web interface allows users to configure the DT82I, access logged data and see current measurements as mimics or in a list using a web browser. FTP provides data to your office over the internet or mobile phone network, without the need for polling or specific host software.
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
