The APCIe-1711 is a fast multi-function and multi-channel counter board for the PCI Express bus. The APCIe-1711 is suited for applications like event counting, position acquisition, motion control, batch counting etc. in the harsh industrial environment. 4 programmable function modules, that can individually configured for each channel with one of the available functions: incremental counter, SSI synchronous serial interface, counter/timer, pulse acquisition, frequency/pulse width/period duration/velocity measurement, PWM, digital inputs and outputs. 64-bit drivers for Windows and Linux as well as programming samples are included, real-time drivers for Windows and Linux are available on request.
The APCIe-1711 board is suitable for a wide range of applications with high precision and reliability in harsh industrial environment. This board can realise many different applications on the same hardware base. The board is supplied with a pool of functions which provides the user with maximum efficiency yet minimum space and parts requirement. The functions are individually configured for each channel through the supplied software. The flexible programming facilities on this board allow many different user applications to be quickly and easily developed and reconfigured as further requirements arise. Thanks to the FPGA board structure, further counting applications can be realised through software adaptation.
Using PCI boards and looking to upgrade to PCI Express boards, the PCI Express boards are functionally compatible with the related PCI boards. PCI Express boards include new technologies and will improve the performance of your installation. PCIe boards include all the standard functions and options of related PCI board and are fully compatible with existing cables, terminals and a PCIe migration driver programming service is available to assist the changeover from an existing PCI system.
Benefit from the new technologies and the new efficient FPGA components that have been added to the PCI Express boards. The FPGA technology allows for shorter cycle times and the PCI Express boards include FPGA components to reduce the cycle time of signal acquisition and regulation tasks. Use the full hardware and software capacity of your board and accelerate your processes. PCI Express boards use a serial interface instead of a parallel interface used by the PCI boards. The PCIe boards also utilise individual buses for each device connected to it instead of a shared one. These changes allow a 16 slot PCIe board to send or receive data at up to 16GB/s, compared to the 133MB/s achieved by PCI boards.
PCI Express boards come with useful software tools for a fast and convenient integration into your application: The ingenious driver concept, ADDIPACK, includes a wide range of drivers and samples, and a configuration tool assist you from the beginning. The PCIe migration driver programming service is also available to assist the changeover.
Physical and environmental conditions
| Dimensions: | 168 x 98 mm |
| System Bus: | According to PCI Express base specification, Revision 1.0a (PCI Express 1.0a) |
| Space Required: | 1-/4-/8-/16-lane PCI Express slot |
| Operating Voltage: | +3.3V/12V from the PC, +24V ext. |
| Front Connector: | 78-pin SUB-D female connector |
| Additional Connector: | 50-pin SUB-D male connector |
| Operating Temperature: | 0 to 60 °C (with forced cooling) |
| FB8001: | Ribbon cable for digital I/O |
| ST370-16: | Standard round cable, shielded, twisted pairs, 2m |
| ST1711-50
|
Standard round cable, shielded, twisted pairs, 2m 78 -pin male connector to 50-pin male connector |
| PX8001: | Screw terminal panel for digital inputs and outputs, DIN Rail mounting |
APCIE-1711
£1,220.26
APCIE-1711-10MHz
£1,117.72
APCIE-1711-24V
£1,212.18
APCIE-1711-5V-I
£1,806.00
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
