The APCIe-1564 is a PCI Express digital I/O board for up to 32 optically isolated digital inputs, including 16 interruptible inputs, 3 counter inputs and 32 digital outputs (5-35V @ 50mA per channel, max 0.5A per 8 channels). The APCIe-1564 can monitor digital inputs with a max frequency of 500kHz and a signal delay of 1µs on 3 channels, otherwise 5kHz. 16 digital outputs with a nominal 5V voltage. All connections via two 37-pin Sub-D male connector to screw terminal panels. Power supply 3.3V from PC @ 590mA (max). Built-in watchdog function, timer/counter and short-circuit protection. 64-bit drivers for Windows and Linux as well as programming samples are included, real-time drivers for Windows and Linux are available on request.
The boards of the APCIe-xxxx series are intended for use in an industrial environment: They are equipped with numerous protective circuits like filters, optical isolation, protection against overvoltage and short-circuits, etc. Thus they ensure a reliable and smooth operation, particularly in case of dangerous interference like voltage peaks or high currents.
Using PCI boards and looking to upgrade to PCI Express boards, the PCI Express boards are functionally compatible with the related PCI boards. PCI Express boards include new technologies and will improve the performance of your installation. PCIe boards include all the standard functions and options of related PCI board and are fully compatible with existing cables, terminals and a PCIe migration driver programming service is available to assist the changeover from an existing PCI system.
Benefit from the new technologies and the new efficient FPGA components that have been added to the PCI Express boards. The FPGA technology allows for shorter cycle times and the PCI Express boards include FPGA components to reduce the cycle time of signal acquisition and regulation tasks. Use the full hardware and software capacity of your board and accelerate your processes. PCI Express boards use a serial interface instead of a parallel interface used by the PCI boards. The PCIe boards also utilise individual buses for each device connected to it instead of a shared one. These changes allow a 16 slot PCIe board to send or receive data at up to 16GB/s, compared to the 133MB/s achieved by PCI boards.
PCI Express boards come with useful software tools for a fast and convenient integration into your application: The ingenious driver concept, ADDIPACK, includes a wide range of drivers and samples, and a configuration tool assist you from the beginning. The PCIe migration driver programming service is also available to assist the changeover.
Inputs
Outputs
Safety Features
Digital Inputs
| Number of Inputs:
|
32; 4 groups of channels with common ground: Input: 0-7, 8-15, 16-23, 24-31 Ch 0-2: 32-bit counter inputs, 500kHz Ch 4-19: 16 interruptible inputs. |
|
| Optical Isolation: | Through optical couplers, 1000 V from the PC to the peripheral | |
| Nominal Voltage: | 5V | |
| Inputs Current:
|
Ch 0-3: 8.5mA @ 5V typical Ch 4-31: 5.9mA @ 5V typical |
|
| Inputs Frequency (Max.):
|
Ch 0-3: 500kHz @ 5V Ch 4-31: 5kHz @ 5V |
|
| Logic Input Level:
|
UH (max.): 6 V / 7.8 mA typ. (channel 4-31) UH (min.): 4 V / 4.1 mA typ. (channel 4-31) UH (max.): 6 V / 11.5 mA typ. (channel 0-3) UH (min.): 4 V / 5.6 mA typ. (channel 0-3) UL (max.): 2 V / 0.8 mA typ. (channel 4-31) UL (max.): >2 V / 1.1 mA typ. (channel 0-3) UL (min.): 0 V / 0 mA typ. |
|
| Filters/Protection Circuit: | Input Filters, Transit Diode: RC Filters, 2 diodes, opto-couplers. | |
Digital Outputs
| Outputs: | 32 |
| Optical Isolation: | Through optical couplers, 1000V |
| Output Type:
|
APCIe-1564-5V: Open Collector APCIe-1564-5V-HS: High-side (Load at ground) acc. to IEC 1131-2 |
| Nominal Voltage: | 5V (APCI-1564-5V) |
| Supply Voltage: | 5-12V (5V Version), 5-35V (5V-HS Version) |
| Current Limit: | 0.5A (typ.) per 8 channels (through PTC) |
| Output Current per Output: | 50mA Typical |
| Short-circuit Current per Output: |
0.5A |
| Timer: | 2 x 12-bit, 1 x programmable as watchdog from 1 µs to 4095s. |
| Switch-Off Time: | l out=0.5A, Load = resistance: 40 μs |
Physical and environmental conditions
| Dimensions: | 168 x 99 mm | |
| System Bus: | According to PCI Express base specification, Revision 1.0a (PCI Express 1.0a) | |
| Place Required: | 1-/4-/8-/16-lane PCI Express slot | |
| Operating Voltage: | +3.3V, from the PC | |
| Current Consumption:
|
Inputs and outputs inactive: Inputs and outputs active: |
340mA ±10%, typical ±590mA ±10%, typical |
| Front Connector: | 37-pin SUB-D male connector | |
| Operating Temperature: | 0 to 60 °C (with forced cooling) | |
| PX901-ZG: | Screw terminal panel for DIN Rail. |
| ST010: | Standard 37-pin D-Sub connection cable, 2m |
| ST011: | Standard 37-pin D-Sub connection cable, 5m |
APCIE-1564-5V
£805.43
PX8500-G
£218.41
PX9000
£149.40
PX901-ZG
£161.97
ST010
£110.88
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
