The APCI-3702 is a PCI length measurement board for up to 5 simultaneous acquisition of up to 5 inductive transducers, LVDT or half-bridge sensors. The APCI-3702 includes a sinus generator supply. 64-bit drivers for Windows and Linux as well as programming samples are included, real-time drivers for Windows and Linux are available on request. Software includes 50 pre-calibrated transducer options and easy step by step instructions for calibrating transducers to individual channels.
Safety Features
Inputs for Inductive Transducers
Channel features
| Number: | 5 (simultaneous) | |
| Input Type: | Single-ended | |
| Coupling: | DC | |
| Resolution: | 16-bit | |
| Accuracy: | 13-bit | |
| Sampling Rate (on 5 channels): |
4.882kHz6.975kHz9.768kHz13.951kHz19.531kHz |
Input level
| Input Impedance: | 2 kΩ software-programmable 10 kΩ, 100 kΩ, 10 MΩ |
Sensor supply (sinus generator)
| Type: | Sinus differential (180° phase-shift) | |
| Number of outputs: | 2 | |
| Coupling: | AC | |
| Programmed Signals: | Output frequency fP (primary frequency): 2-20 kHz depending on the transducer (50 kHz Knaebel) | |
| Output Impedance: | < 0.1 Ω typ., > 30 kΩ typ. in shutdown mode | |
| Short-circuit Current: | 0.7 A typ. at 25°C with thermal protection |
Digital I/O
| Number of I/O Channels: | 8 Digital Inputs, 8 Digital Outputs, 24V |
| Optical Isolation: | 1000V through opto-couplers |
| Input Current at 24V: | 11mA typical |
| Max. Input Frequency: | 5kHz |
| Max. Switching Current: | 50mA typical |
| Input Range: | 0-30V |
| Output Range: | 5-30V |
Physical and environmental conditions
| Dimensions: | 109 x 138 mm |
| System Bus: | PCI 32-bit 3.3/5 V acc. to spec. 2.2 (PCISiG) |
| Space Required: | 1 PCI slot for analog inputs, 1 slot opening for the digital I/O with FB3702 |
| Operating Voltage: | +5 V, ±5 % from the PC; 24V external |
| Current Consumption (+5V from the PC) |
990mA typical, without load. |
| Front Connector: | 50-pin SUB-D male connector |
| Additional Connector: |
16-pin male connector for connecting the digital I/O |
| Operating Temperature: | 0 to 60 °C (with forced cooling) |
| PX3701HB-8: | Connection box for APCI-3702 |
| PX3701LVDT-8: | Connection box for APCI-3702 |
| ST3701-8-KS: | 50-pin D-Sub connection cable between APCI-3702 & PX3701-8 |
| FB3702: | Ribbon cable for digital I/O on separate bracket |
| PX901-ZG: | Screw terminal panel for digital I/O, DIN Rail mounting |
| ST010: | Standard 37-pin D-Sub connection cable, 2m |
| ST011: | Standard 37-pin D-Sub connection cable, 5m |
APCI-3702
£0.00
FB3702
£30.49
PX901-ZG
£161.97
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
