The APCI-3600 is a PCI noise and vibration measurement board with 8 channels for ±10V inputs via a BNC male connector with selectable frequencies from 2kHz to 200kHz. Each input channel can be a differential or single ended input with simultaneous sampling. The APCI-3600 includes 2 analogue outputs and 16 configurable digital I/O’s. The APCI-3600 includes 8 current sources for direct connection of ICP sensors. 64-bit drivers for Windows and Linux as well as programming samples are included, real-time drivers for Windows and Linux are available on request.
Analog inputs (for all versions)
Current sources
Chronometer inputs (only for version APCI-3600)
Analog outputs (only for version APCI-3600)
Digital (only for version APCI-3600)
Onboard SDRAM module
Analog inputs
| Analog Inputs: | 8 Single-ended or differential |
| Resolutions: | 24-bit |
| A/D Converter: | Delta-Sigma, 5th Order, Multibit
Delta-Sigma modulator |
| Input Ranges: | Gain x 1: ±10V Single-ended, ±5V Differential
Gain x 10: ±1V Single-ended, ±0.5V Differential |
| Sampling Rate: | 2kHz up to 200kHz selectable through software |
Analog Outputs
| Number of Outputs: | 2 |
| Resolutions: | 16-bit |
| Output Range: | ±10V |
| Overvoltage Protection: | ±12V, 100mA max, direct current |
| Short-circuit Current: | ±45mA typical |
Digital I/O
| Number of Channels: | 8, Open collector outputs. |
| Optical Isolation: | 1000V |
| Nominal Voltage: | 24V |
| Current: | Input: 7mA @ 24vDC, Output: 50mA max. |
Current Source
| Number of Channels: | 8 |
| Output Current: | 4mA typical at 24vDC |
| Application: | Suitable fo ICP sensor power supply |
Physical and environmental conditions
| Dimensions: | 175 x 99 mm |
| System Bus: | PCI 32-bit 3.3/5 V acc. to spec. 2.2 (PCISiG) |
| Space Required: | 1 PCI slot for the analogue inputs 1 slot opening for the digital I/O 1 slot opening for chronometer and analogue outputs |
| Operating Voltage: | +5 V, ±5 % from the PC, +3.3V |
| Front Connector (analog channels): |
8 SMB co-axial connector on bracket |
| Additional Connector:
|
37-Pin D-Sub connector for digital I/O 15-Pin D-Sub connector for chrinometer inputs 15-Pin D-Sub connector for analogue outputsr |
| Operating Temperature: | 0 to 60 °C (with forced cooling) |
APCI-3600
£3,256.36
APCI-3600-L
£2,822.18
FB3600-AC
£36.09
FB3600-D
£36.09
ST3600
£346.62
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
