The APCI-3501 is a PCI analog output board for up to 8 analogue outputs with 14-bit resolution and 12-bit accuracy. Freely programmable ±10V analogue outputs via a 37-pin Sub-D male connector and 2 digital input and 2 digital output channels via 16-pin male connector to FB3000 ribbon to a separate 37-pin Sub-D male connector. 64-bit drivers for Windows and Linux as well as programming samples are included, real-time drivers for Windows and Linux are available on request.
Analogue Outputs
| Number of Inputs: | 4 or 8 outputs |
| Resolution: | 14-bit resolution, 12-bit accuracy |
| Optical Isolation: | 500V through opto-couplers |
| Output Ranges: |
0-10V or ±10V. Switchable through software |
| Setup Time at 2kOhms, 1000pF: | 30µs |
| Overvoltage Protection: | ±12V |
| Max Output Current/Load: | ±5mA/50 pF, 2kOhms |
| Short-Circuit Current: | ±25mA |
| Output Voltage After Reset: |
0V |
| Watchdog: | Software programmable, 4 different time bases: µs, ms, s, min |
Digital I/O
| Number of I/O Channels: | 2 digital inputs, 24V & 2 digital outputs, 24V |
| Logical “0” Level: | 0-5V |
| Logical “1” Level: | 10-30V |
| Optical Isolation: | 500V through opto-couplers from PC to peripheral |
| Output Range: | 10mA |
| Output Type: | Open Collector |
Physical and environmental conditions
| Dimensions: | 175 x 99 mm |
| System Bus: | PCI 32-bit 3.3/5V acc. to spec. 2.1 (PCISiG) |
| Space Required: | 1 PCI slot for analog inputs, 1 slot opening for digital I/O with FB8300 |
| Operating Voltage: | +5 V, ±5 % from the PC |
| Current Consumption: | 440mA ±10% typical |
| Front Connector: | 37-pin SUB-D male connector |
| Additional Connector: | 16-pin male connector for ribbon cable to connect the digital I/O’s |
| Operating Temperature: | 0 to 60 °C (with forced cooling) |
| PX901-A: | Screw terminal panel for analogue outputs |
| PX901-AG: | Screw terminal panel for analogue outputs, DIN Rail mounting |
| PX_BNC: | BNC connection box for analogue inputs/outputs |
| ST010: | Standard 37-pin D-Sub connection cable, 2m |
| ST011: | Standard 37-pin D-Sub connection cable, 5m |
| FB3000: | Ribbon cable for digital I/O |
| ST370-16: | Standard round cable, shielded, twisted pairs, 2 m |
| PX901-ZG: | Screw terminal panel for digital I/Os, DIN Rail mounting |
APCI-3501-4
£500.77
APCI-3501-8
£745.83
FB3000
£30.49
PX-BNC
£310.28
PX901-A
£117.81
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
