The APCI-3120 is a PCI Multifunction board for up to 16 single ended or 8 differential inputs with 16-bit resolution and 100kHz throughput, plus 4 analog outputs. Freely programmable ±10V and 0-20mA analogue inputs plus four -10 to +10V analogue outputs via a 37-pin Sub-D male connector and 4 digital input, 4 digital output channels via a 16-pin male connector. 64-bit drivers for Windows and Linux as well as programming samples are included, real-time drivers for Windows and Linux are available on request.
The APCI-3120 is a 16-bit multifunction board for 3.3V and 5V PCI systems, with optical isolation and a high throughput rate of 100 kHz. The PCI board has additional types of conversion: Sequence RAM, Auto Refresh, scan, timer or external event.
Furthermore, the board has a PCI DMA, 2 watchdogs, 4 digital inputs and 4 digital outputs. Sensors, which allow to supply current signals instead of voltage signals, also can be acquired with the APCI-3120, as this board offers up to 16 current inputs. The board is protected against overvoltage and input filters and it is protected against high frequency emission. With the free calibration tool you can do the fine adjustment on-site.
Analogue Inputs
| Number of Inputs: | 8 or 16 Single-ended or 4 or 8 Differential inputs |
| Resolution: | 16-bit |
| Optical Isolation: | 500V through opto-couplers from PC to peripheral |
| Input Ranges: | Software programmable for each channel: 0-10V, ±10V, 0-5V, ±5V, 0-2V, ±2V, 0-1V, ±1V or 0-20mA optional |
| Gain: | Software programmable (x1, x2, x5 or x10) |
| Throughput: | 100kHz |
| Trigger: | Through software, timer, external event (24V input) |
| Data Transfer: | Data to the PC through FIFO memory, I/O commands Interrupt at EOC (End of Conversion) and EOS (End of Scan), DMA transfer at EOC |
| Interrupts: | End of conversion, at timer overrun, End of scan |
Analogue Outputs
| Number of Outputs: | 4 or 8 |
| Resolution: | 14-bit |
| Optical Isolation: | 500V through opto-couplers from PC to peripheral |
| Output Ranges: |
±10V, 0-10V switchable through software |
| Setup Time at 2kOhms, 1000pF: | typ 10µs (at 10V step) |
| Overvoltage Protection: | ±12V |
| Max Output Current: | ±5mA / 500pF, 2kOhms |
| Short-Circuit Current: |
±25mA |
| Output Voltage After Reset: | 0V |
Digital I/O
| Number of I/O Channels: | 4 digital inputs, 24V & 4 digital outputs, 24V |
| Optical Isolation: | 1000V through opto-couplers from PC to peripheral |
| Input Current at 24V: | 3mA |
| Input Range: | 0-30V |
| Output Range: | 5-30V |
| Output Voltage after Reset: | 0V |
Physical and environmental conditions
| Dimensions: | 169 x 99 mm |
| System Bus: | PCI 32-bit 3.3/5V acc. to spec. 2.1 (PCISiG) |
| Space Required: | 1 PCI slot for analog inputs/outputs, 1 slot opening for digital I/O with FB3000 |
| Operating Voltage: | +5 V, ±5 % from the PC |
| Current Consumption: | 710-790,A typical. Depening on board version. |
| Front Connector: | 37-pin SUB-D male connector |
| Additional Connector: | 16-pin male connector for connecting the digital I/O’s |
| Operating Temperature: | 0 to 60 °C (with forced cooling) |
| PX9100-A: | Screw terminal panel for analogue inputs/outputs |
| PX9100-AG: | Screw terminal panel for analogue inputs/outputs DIN Rail mounting |
| PX_BNC: | BNC connection box for analogue inputs/outputs |
| ST010: | Standard 37-pin D-Sub connection cable, 2m |
| ST011: | Standard 37-pin D-Sub connection cable, 5m |
| FB3000: | Ribbon cable for digital I/O |
Options:
| Option SF: | Precision filter for 1 single-ended channel |
| Option DF: | Precision filter for 1 differential channel |
| Option PC-SE: | Current input 0(4)-20mA for 1 single-ended channel |
| Option PC-Diff: | Current input 0(4)-20mA for 1 differential channel |
APCI-3120-16-4
£827.08
APCI-3120-16-8
£981.70
APCI-3120-8-4
£751.16
APCI-3120-8-8
£888.34
FB3000
£30.49
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
