The APCI-3010 is a PCI analog input board for up to 16 single ended or 8 differential inputs with 12-bit resolution and 200kHz throughput. Freely programmable ±10V and 0-20mA analogue inputs via a 37-pin Sub-D male connector and 4 digital input, 4 digital output and 24 digital TTL I/O channels via a 50-pin male connector. 64-bit drivers for Windows and Linux as well as programming samples are included, real-time drivers for Windows and Linux are available on request.
The APCI-3010 is a 12-bit analog input board for 3.3 V and 5 V PCI systems, with optical isolation up to 1000 V and a high throughput rate of 200 kHz. The board has additional types of conversion: Sequence RAM, Auto Refresh, scan, timer or external event.
Furthermore, the board has a PCI DMA, 2 watchdogs, 4 digital inputs and 4 digital outputs. Sensors, which allow to supply current signals instead of voltage signals, also can be acquired with the APCI-3010, as this board offers up to 16 current inputs. Further features of the board are overvoltage protection and input filters and it is protected against high frequency emission. With the free calibration tool you can do the fine adjustment on-site.
Analogue Inputs
| Number of Inputs: | 4, 8 or 16 Single-ended or 2, 4 or 8 Differential inputs |
| Resolution: | 12-bit |
| Optical Isolation: | 1000V through opto-couplers from PC to peripheral |
| Input Ranges:
|
Software programmable for each channel: 0-10V, ±10V, 0-5V, ±5V, 0-2V, ±2V, 0-1V, ±1V or 0-20mA optional |
| Gain: | Software programmable (x1, x2, x5 or x10) |
| Throughput: | 200kHz |
| Trigger: | Through software, timer, external event (24V input) |
| Data Transfer:
|
Data to the PC through FIFO memory, Interrupt at EOC (End of Conversion), DMA transfer at EOC |
| Interrupts: | End of conversion, at timer overrun, End of scan |
Digital I/O
| Number of I/O Channels: | 4 digital inputs, 24V & 4 digital outputs, 24V |
| Logical “0” Level: | 0-14V |
| Logical “1” Level: | 19-30V |
| Optical Isolation: | 1000V through opto-couplers from PC to peripheral |
| Outputs: | High Side, 50mA |
TTL I/O
| Number of TTL I/O Channels: | 24 |
| I/O Address Range: | 128 Byte, addressing: 32-bit |
| Programming: | Through write/read commands |
Physical and environmental conditions
| Dimensions: | 175 x 99 mm |
| System Bus: | PCI 32-bit 3.3/5V acc. to spec. 2.2 (PCISiG) |
| Space Required: | 1 PCI slot for analog inputs, 1 slot opening for digital I/O with FB8001 |
| Operating Voltage: | +5 V, ±5 % from the PC |
| Front Connector: | 37-pin SUB-D male connector |
| Additional Connector: | 50-pin male connector for connecting the digital I/O’s |
| Operating Temperature: | 0 to 60 °C (with forced cooling) |
| PX9100-A: | Screw terminal panel for analogue inputs |
| PX9100-AG: | Screw terminal panel for analogue inputs, DIN Rail mounting |
| PX_BNC: | BNC connection box for analogue inputs |
| ST010: | Standard 37-pin D-Sub connection cable, 2m |
| ST011: | Standard 37-pin D-Sub connection cable, 5m |
| FB8001: | Ribbon cable for digital I/O |
| ST370-16: | Standard round cable, shielded, twisted pairs, 2 m |
| PX8001: | Screw terminal panel for analogue inputs, DIN Rail mounting |
APCI-3010-16
£703.17
APCI-3010-4
£601.99
APCI-3010-8
£655.27
PX-BNC
£310.28
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
