The APCI-2032 is a PCI digital output board for up to 32 optically isolated digital outputs. The APCI-2032 can control digital outputs with voltages from 10 to 36V (APCI-2032-5 5 to 12V), max 500mA per channel and total 3A over the 16 channels. Connection via a 37-pin Sub-D male connector to screw terminal panels. Power supply 5V from PC @ 230mA. 8 bit programmable watchdog function with timer and short-circuit protection. 64-bit drivers for Windows and Linux as well as programming samples are included, real-time drivers for Windows and Linux are available on request.
Digital Outputs
| APCI-2032 | APCI-2032-5 | |
| Outputs: | 32 | |
| Optical Isolation: | Through optical couplers, 1000V | |
| Output Type: | High-side (Load at ground) acc. to IEC 1131-2 | |
| Nominal Voltage: | 24V | 5V |
| Supply Voltage: | 10 to 36V | 5 to 12V |
| Max. Current for 8 Outputs: | 6A typical (2 x 3A) | |
| Output Current/Channel: | 500mA typical/channel | |
| Short-circuit Current/Shut-Down at 24V, Rload < 0.1W: |
1.5A | |
| RDS ON Resistance: | 0.4Ω max | |
| Switch-On Time: | l out=0.5A, Load = resistance: 94 μs | l out= 50mA, Load = resistance: 250 μs |
| Switch-Off Time: | l out=0.5A, Load = resistance: 8 μs | l out= 50mA, Load = resistance: 3 μs |
| Overtemperature (Shut-Down): | 170°C (Output driver) | |
| Temperature hysteresis: | 20°C (Output driver) | |
Physical and environmental conditions
| Dimensions: | 131 x 99 mm |
| System Bus: | PCI 32-bit 5V acc to specifications 2.1 (PCISIG) |
| Place Required: | 1 PCI Slot |
| Operating Voltage: | +5 V, ±5 % from the PC |
| Current Consumption: | 230mA ±10mA typical |
| Front Connector: | 37-pin SUB-D male connector |
| Operating Temperature: | 0 to 60 °C (with forced cooling) |
| PX9000: | 3 row screw terminal panel for digital outputs |
| PX901-D: | Screw terminal panel for digital outputs |
| PX901-DG: |
Screw terminal panel for digital outputs DIN Rail mounting |
| PX8500-G: | Relay output board, cascadable, DIN Rail mounting |
| ST010: | Standard 37-pin D-Sub connection cable, 2m |
| ST011: | Standard 37-pin D-Sub connection cable, 5m |
| ST010-S | Same as ST010 but separate 24V supply cable. |
| ST021: | Round shielded cable between PA1500 & PX8500-G, 2m |
| ST022: | Round shielded cable between two PX8500-G, 2m |
| ST8500: | Ribbon cable for cascading two PX8500-G. |
APCI-2032
£448.80
APCI-2032-5
£487.46
PX8500-G
£218.41
PX9000
£149.40
PX901-D
£117.81
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
