The APCI-1564 is a PCI digital I/O board for up to 32 optically isolated digital inputs, including 16 interruptible inputs, 3 counter inputs and 32 digital outputs (10-36V @ 500mA per channel, max 6A total). Suitable for digital inputs with a nominal 24V @ up to 10.5mA on 4 channels, otherwise max 5mA typical. The APCI-1564 can monitor digital inputs with a max frequency of 500kHz and a signal delay of 1µs on 4 channels, otherwise 5kHz with a 70µs delay. 16 digital outputs with a nominal 24V voltage. All connections via two 37-pin Sub-D male connector to screw terminal panels. Power supply 5V from PC @ 410mA. Built-in watchdog function, timer/counter and short-circuit protection. 64-bit drivers for Windows and Linux as well as programming samples are included, real-time drivers for Windows and Linux are available on request.
Inputs
Outputs
Safety Features
Digital Inputs
| Number of Inputs: | 32; 4 groups of channels with common ground: Input: 0-7, 8-15, 16-23, 24-31 0-2: fast counter inputs, 500kHz 4-19: interruptible inputs. |
|
| Optical Isolation: | Through optical couplers, 1000 V from the PC to the peripheral | |
| Nominal Voltage (24V, APCI-1564): | Digital Inputs | Counter Inputs |
| Inputs Current: | 4mA typical | 10.5mA typical |
| Logic Input Level:
|
U nominal: 24V UH max: 26V @ 5mA typical UH min: 19V @ 1.3mA typical UL max: 14V @ 0.6mA typical UL min: 0 @ 0mA typical |
U nominal: 24V UH max: 26V @ 12.3mA typical UH min: 19V @ 5.2mA typical UL max: 14V @ 3.2mA typical UL min: 0 @ 0mA typical |
| Nominal Voltage (5V, APCI-1564-5V): | Digital Inputs | Counter Inputs |
| Inputs Current: | 6mA typical | 8.5mA typical |
| Logic Input Level: | U nominal: 5V UH max: 6V @ 8.4mA typical UH min: 3.3V @ 3mA typical UL max: 2.7V @ 1.9mA typical UL min: 0 @ 0mA typical |
U nominal: 5V UH max: 6V @ 11.3mA typical UH min: 3.3V @ 3.7mA typical UL max: 2.7V @ 2.1mA typical UL min: 0 @ 0mA typical |
| Signal Delay: | 70 μs | 1 μs |
| Maximum Input Frequency: | 5 kHz | 500 kHz |
Digital Outputs
| Outputs: | 32 |
| Optical Isolation: | Through optical couplers, 1000V |
| Output Type: | High-side (Load at ground) acc. to IEC 1131-2 |
| Nominal Voltage: | 24V (APCI-1564); or 5V (APCI-1564-5V) |
| Supply Voltage: | 10 to 36V, min. 5V (through front connector) |
| Max. Current for 16/32 Outputs: | 3A/6A typical |
| Output Current/Channel: | 500mA Max |
| Short-circuit Current/Shut-Down at 24V, Rload < 0.1W: |
1.5A |
| RDS ON Resistance: | 0.4W max |
| Switch-On Time: | l out=0.5A, Load = resistance: 120 μs |
| Switch-Off Time: | l out=0.5A, Load = resistance: 40 μs |
| Overtemperature (Shut-Down): | 170°C (Output driver) |
| Temperature hysteresis: | 20°C (Output driver) |
Physical and environmental conditions
| Dimensions: | 171 x 99 mm |
| System Bus: | PCI 32-bit 3.3/5V acc to specifications 2.1 (PCISIG) |
| Place Required: | 1 PCI Slot + 1 additional slot opening |
| Operating Voltage: | +5 V, ±5 % from the PC |
| Current Consumption: | 395mA ±15mA typical |
| Front Connector: | 37-pin SUB-D male connector for 32 digital outputs |
| Additional Connector: | 37-pin SUB-D male connector on separate bracket for 32 digital inputs |
| Operating Temperature: | 0 to 60 °C (with forced cooling) |
| PX9000: | 3 row screw terminal panel for digital outputs |
| PX901-D: | Screw terminal panel for digital I/O |
| PX901-DG: |
Screw terminal panel for digital I/O, DIN Rail mounting |
| PX901-ZG: | Screw terminal panel for APCI-1564-5V Only. |
| PX8500-G: | Relay output board, cascadable, DIN Rail mounting |
| ST010: | Standard 37-pin D-Sub connection cable, 2m |
| ST011: | Standard 37-pin D-Sub connection cable, 5m |
| ST010-S | Same as ST010 but separate 24V supply cable. |
| ST021: | Round shielded cable between PA1500 & PX8500, 2m |
| ST022: | Round shielded cable between two PX8500, 2m |
| ST8500: | Ribbon cable for cascading two PX8500. |
APCI-1564
£604.09
APCI-1564-5
£717.87
PX8500-G
£218.41
PX9000
£149.40
PX901-D
£117.81
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
