Description

Features

• 4-digit LCD display 48 x 96 mm
• No External power supply, unit is Loop-powered from 4-20mA signal.
  
• Easy scalable from front keys
• Backlight
• Standard and ATEX Ex version
• IP65 enclosure from front

Technical characteristics

• Input: 4-20 mA standard signal.
• An adhesive label with process units may be attached to the front below the digits.
• Input voltage drop is ≤ 1.5 VDC, corresponding to a feed-through resistance of 75 Ω (when backlight is switched off).
• Reversed display readout is possible, see routing diagram on the reverse.

Programming/scaling: DIP switch 1, switch 1 on the rear panel is used to enable / disable the front keys thus facilitating scaling.

Scale mode: In scale mode the indicator may be scaled, see routing diagram on the reverse of this data sheet.

Run mode: In run mode the indicator will display the actual current according to the scaling.

Backlight: DIP switch 1, switch 2 and 3 on the rear panel is used to select backlight intensity, see programming on the reverse of this data sheet. Please note that the input voltage drop is dependent on backlight intensity.

Full electrical specifications can be found on the datasheet.