Hand held microprocessor based clamp-on ultrasonic flow meter, with graphical display of data, data logger, RS232, USB, on board help, automatic speed of sound measurement and flow profile correction algorithm. Available with transducers for pipe sizes 15 – 1200mm and temperatures up to 105°C. Suitable for water, oil, chemicals in most pipe materials.
Key Benefits
Specification
Hand Held Electronics
Protection Class : IP54
Material : ABS
Weight : < 1.5 Kg
Dimensions : 275 x 150 x 55mm
Display : 240 x 64 graphics LCD with backlight
Keypad : 17 key tactile membrane
Temperature range : 0ºC to +50ºC (operating) -10ºC to +50ºC (storage)
Power supply/charger Input : 12VDC
Power consumption 160mA once fully charged
Volumetric flow units : m3, gallons (Imperial and US), Litres
Velocity units : metres/sec, feet/sec
Flow velocity range : 0.01 m/sec to 25 m/sec to 4 significant figures (option higher if required)
Total volume : 12 digits forward and reverse
Continuous battery level indication
Continuous signal quality indication
ERROR messages
Analogue 4-20mA into 750 Ohms : User definable scaling
Resolution : 0.1% of full scale
Pulse 5 Volts User definable scaling
Serial RS232, USB
Data Logging memory capacity 120,000 data points
Data Logging output Via RS232 or displayed graphically/numerically
Transducer Standard X type Pipe size : 15-1200mm
General service temp short term :-30 to 130°C
General service temp long term :-30 to 105°C
Transducer Standard X type HT Pipe size : 15-1200mm
General service temp short term :-40 to 220°C
General service temp long term :-30 to 170°C
Transducer Standard Y type Pipe size : 1200-6500mm
General service temp short term :-30 to 130°C
General service temp long term :-30 to 105°C
Special application transducer design service is available please contact us for details.
Repeatability ±0.5% with unchanged transducer positions
Accuracy ± 1% to± 2% or ± 0.02 m/sec whichever is the greater, depending on application.
The specification assumes turbulent flow profile with Reynolds numbers above 4000
If you are interested in hiring one of these units, please contact us to discuss your requirements.
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
