10130052B
ComNav G2 GNSS Satellite with G2 Compass Differential GPS (DGPS) correction, G2 Navigator Mono Display and 15m cable. Output: NMEA0183. Update rate: Heading & position updates at up to 20 times per second, and can operate at sustained turn rates up to 90° per second. Power Supply 10 to 36vDC..
111-75
P11 Glass Combination pH Electrode for a pH range of 0-14. Combination electrode with a Silver Chloride, liquid filled, single annular ceramic junction. Eo point -25 to +25mV. Shaft dimensions (approx) 12mm diameter and 120mm length. BNC connector with 1m cable. Operating temperature 0 to 100 C. Suitable for general..
11220003
ComNav G2B GNSS Satellite with Compass Differential GPS (DGPS) correction and 15m cable. Output: NMEA0183. Update rate: Heading & position updates at up to 20 times per second, and can operate at sustained turn rates up to 90° per second. Power Supply 10 to 36vDC (240mA @ 12vDC). The G2B..
11220008
ComNav G1 GNSS Satellite Compass with 6m cable. Output: NMEA2000. Update rate: Heading & position updates at up to 20 times per second, and can operate at sustained turn rates up to 45° per second. Power Supply 10 to 36vDC (240mA @ 12vDC). The G1 contains a ComNav receiver module..
1441211
Traco Power DC-DC Converter. Input Voltage: 9-18vDC. Output Voltage 24vDC. Output Power: 3 Watts (125mA)...
5104A–B
PR Electronics model 5104 programmable transmitter, 24 - 230 V AC/DC power supply, dual channel with 0-20, 4-20mA or voltage input and mA or voltage output. See data sheet for input and output options..
6337A2B
PR6337A 2-Wire programmable transmitter with HART 7 Protocol and an 8-35vDC power supply. Dual channel unit for RTD, TC, Ohm or mV input, producing a 4-20mA output. 1.5kvAC galvanic isolation. Can be mounted vertically or horizontally on a DIN rail...
6451680
RS485 Modbus RTU output option for the MX32 Gas Controller...
748-524
Type T slimline, 6.2mm thick DIN rail mount thermocouple transmitter, range 0 to + 300 deg c, power supply 19.2 - 30v DC, accuracy 0.1%, output 4-20mA..
814-150
Magnetic holder for RayTemp38 thermometers..
9106A1B
Dual channel isolated HART transparent repeater, 2 x 4-20mA input, 2 x 4-20 mA output, power supply 19.2 - 31.2, SIL2 certified to IEC 61508..
9106B1B
Dual channel isolated HART transparent repeater ATEX approved I.S., 4-20mA input, 4-20 mA output, power supply 19.2 - 31.2, SIL2 certified to IEC 61508..
9202A2A
Pulse isolator, 1 channel with NAMUR/contact input frequency range 0-5 KHz, and N.O. SPST relay output, SIL 2, isolated, 19.2 - 31.2 VDC supply. With cable fault check (LFD) function...
9202B2A
Pulse isolator, I.S ATEX approved 1 channel with NAMUR/contact input frequency range 0-5 KHz, and N.O. SPST relay output, SIL 2, isolated, 19.2 - 31.2 VDC supply...
9203A1A1
Solenoid and alarm driver, 1 channel driver output, PNP input, SIL 2, low current version (35 mA), 19.2 - 31.2 VDC supply. Relay output...
9203B1A1
Solenoid and alarm driver, ATEX approved 1 channel driver output, PNP input, SIL 2, low current version (35 mA), 19.2 - 31.2 VDC supply. Relay output...
AC1211-V1
Mains Adaptor for CO2 DISPLAY. Mains 100...240VAC Plug to 12vDC...
CHAR/12/LA/300
Charger unit, for lead acid batteries, supply 230VAC, O/P 13.7/14.5 vDC @ 300mA, with tag connections. Suitable for small batteries with capacity up to 3.2 AH..
DK-35A
Mounting Kit for NPort 5100 Series Device Server. Suitable for a 35mm DIN-Rail..
DLOG-4219
gSKIN Heat Flux Data Logger with autonomous, live and trigger logging modes. Internal memory for up to 2 million data points, logging rate 50Hz to 12 hours and internal rechargeable Lithium battery for up to 30 days logging, dependent on logging rate. 0.5m cable to TEG connector for connecting gSKIN..
EGW1-1C0-00-2ETH-IA3-MB-IS
EGW1 - Serial Modbus ASCII/RTU to Modbus TCP Protocol Converter with Dual Ethernet Switch. 1 x RS232/RS485/RS422 Isolated Serial Port and 2 x RJ45 Ethernet Port. DIN Rail mounted industrial enclosure with terminal blocks. Power supply: 10-30vDC, consumption 70mA @ 12vDC. Dimensions: 100 x 22.5 x 112mm. Operating Temperature: -15..
GS-AQ-S-UN-D
GS-AQ Space Mounted Air Quality & Temperature Transmitter. Non-Dispersive Infra-Red (NDIR) and PT100 temperature sensor. Measurement Range: 0-100%, <15% Good Air Quality, 15 to 60% Start to Open Dampers, >60% Fully Open Dampers. Output: 4-20mA or 0-10vDC selectable, plus PT100 output for temperature. Power supply: 24vDC. IP30 ABS housing, dimensions..
GSKINKIT-1586R
gSKIN Thermal Radiation Kit for power measurements of solar, laser and LED sources. Range 0-12mW with a resolution of 9W. Sensor size 4.4mm x 4.4mm. Data logger has a logging frequency of 50Hz to every 12 hours and storage for up to 2 million readings. Kit includes: MSR Logger, DLOG-4219;..
HP23-A-SET
HygroPalm 23 handheld relative humidity and temperature instrument with single probe input. Range 0-100% RH & -50 to 200°C. Psychrometric calculations of Dew point, wet-bulb temperature, mixing ratio, enthalpy, water vapor content and water vapor density. Supplied as a kit complete with HP23-A, HC2A-S probe, E2-02A cable, ER-15 insertion calibration..