omni instruments | sensors and data acquisition equipment

Sales & Technical Support

GPS Compass Units & Floating Core Magnetometers

Edit Content

OEM Compass

A range of OEM Compasses for manufacturers of equipment which require a fully-interfaced heading derived from the Earth s magnetic field. The A4020 includes auto-calibration and comes in a fixed or floating core to a maximum of 35 or 45°. ...

GPS-MB Industrial GPS with NMEA and Modbus Communications

The GPS-MB is an industrial GPS with NMEA and Modbus communications. The unit has two separate serial ports, one RS232 port for configuration and NMEA output and a second RS485 port for Modbus RTU or Modbus ASCII providing all GPS data (Latitude, Altitude, True Course, Speed, UTC Time, etc) via ...

ComNav G1 GNSS Satellite Compass

The ComNav G1 GNSS Satellite Compass provides true heading measurement with an accuracy of 0.5° RMS. The system uses differential GPS to measure heading and therefore is not subject to magnetic variation or deviation. Heading data is transmitted to an indicator or autopilot via a standard NMEA0183 or NMEA2000 data ...

ComNav G2 and G2B GNSS Satellite Compass

The ComNav G2 and G2B GNSS Satellite Compass provides true heading measurement with an accuracy of 0.25° RMS. The system uses differential GPS to measure heading and therefore is not subject to magnetic variation or deviation. Heading data is transmitted to an indicator or autopilot via a standard NMEA0183 or ...

ComNav G2 GNSS Satellite Compass with G2 Navigator Display

The ComNav G2 GNSS Satellite Compass with Navigator G2 Display provides true heading, GPS position data, gyro data and speed log in a single display. The system uses differential GPS to measure heading and therefore is not subject to magnetic variation or deviation. Heading data is transmitted to an autopilot ...
Edit Content

OEM Compass

A range of OEM Compasses for manufacturers of equipment which require a fully-interfaced heading derived from the Earth s magnetic field. The A4020 includes auto-calibration and comes in a fixed or floating core to a maximum of 35 or 45°. ...

GPS-MB Industrial GPS with NMEA and Modbus Communications

The GPS-MB is an industrial GPS with NMEA and Modbus communications. The unit has two separate serial ports, one RS232 port for configuration and NMEA output and a second RS485 port for Modbus RTU or Modbus ASCII providing all GPS data (Latitude, Altitude, True Course, Speed, UTC Time, etc) via Modbus registers. The unit is supplied with a magnetic mounted GPS sensor with 3m cable and SMA connector to the GPS-MB, which is DIN Rail ...

ComNav G1 GNSS Satellite Compass

The ComNav G1 GNSS Satellite Compass provides true heading measurement with an accuracy of 0.5° RMS. The system uses differential GPS to measure heading and therefore is not subject to magnetic variation or deviation. Heading data is transmitted to an indicator or autopilot via a standard NMEA0183 or NMEA2000 data output. ...

ComNav G2 and G2B GNSS Satellite Compass

The ComNav G2 and G2B GNSS Satellite Compass provides true heading measurement with an accuracy of 0.25° RMS. The system uses differential GPS to measure heading and therefore is not subject to magnetic variation or deviation. Heading data is transmitted to an indicator or autopilot via a standard NMEA0183 or NMEA2000 data output. The system is IMO compliant and Wheelmark and USCG approved, and may be used as a primary heading source. ...

ComNav G2 GNSS Satellite Compass with G2 Navigator Display

The ComNav G2 GNSS Satellite Compass with Navigator G2 Display provides true heading, GPS position data, gyro data and speed log in a single display. The system uses differential GPS to measure heading and therefore is not subject to magnetic variation or deviation. Heading data is transmitted to an autopilot via a standard NMEA0183 data output. ...

OEM Compass

A range of OEM Compasses for manufacturers of equipment which require a fully-interfaced heading derived from the Earth s magnetic field. The A4020 includes auto-calibration and comes in a fixed or floating core to a maximum of 35 or 45°. ...

GPS-MB Industrial GPS with NMEA and Modbus Communications

The GPS-MB is an industrial GPS with NMEA and Modbus communications. The unit has two separate serial ports, one RS232 port for configuration and NMEA output and a second RS485 port for Modbus RTU or Modbus ASCII providing all GPS data (Latitude, Altitude, True Course, Speed, UTC Time, etc) via ...

ComNav G1 GNSS Satellite Compass

The ComNav G1 GNSS Satellite Compass provides true heading measurement with an accuracy of 0.5° RMS. The system uses differential GPS to measure heading and therefore is not subject to magnetic variation or deviation. Heading data is transmitted to an indicator or autopilot via a standard NMEA0183 or NMEA2000 data ...

ComNav G2 and G2B GNSS Satellite Compass

The ComNav G2 and G2B GNSS Satellite Compass provides true heading measurement with an accuracy of 0.25° RMS. The system uses differential GPS to measure heading and therefore is not subject to magnetic variation or deviation. Heading data is transmitted to an indicator or autopilot via a standard NMEA0183 or ...

ComNav G2 GNSS Satellite Compass with G2 Navigator Display

The ComNav G2 GNSS Satellite Compass with Navigator G2 Display provides true heading, GPS position data, gyro data and speed log in a single display. The system uses differential GPS to measure heading and therefore is not subject to magnetic variation or deviation. Heading data is transmitted to an autopilot ...

Contact us

8:30 AM to 5 PM Monday to Thursday
8:30 AM to 3 PM on Friday.

A real person will answer the phone and deal with your enquiry

We are here to help

Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.

Enquire now