AV-D Single-Point Multi-Range Air Velocity Transmitter
The AV-D is a single point, insertion, air velocity transmitter with user selectable 0-10vDC or 4-20mA outputs and 4 user selectable measurement ranges (0-4m/s, 0-8m/s, 0-16m/s or 0-32m/s). The unit requires a 12-35vDC power supply and has an Insertion length of up to 215mm and probe diameter of 19mm. A ...
The AVT is an all in one air velocity and temperature transmitter suitable for HVAC applications and can be used for measuring air velocity, temperature and air volume in ventilation systems. Air volume is calculated from the air velocity and the duct diameters. Each unit has options of display and ...
Multi-Point Air Velocity Probes & PA267 Differential Pressure Sensor.
A multi-point air velocity probes system using the PA267 differential pressure sensor and AV-EP or AV-MPS air velocity probes. This system can be used to ensure that recommended flow rates for public buildings and industrial plant are achieved. Suitable for flow ranges of 0 - 40m/s. ...
The DPT Flow is designed for centrifugal fans equiped with inlet rings. The air volume flow measurement is based on differential pressure value measured from the fan. Suitable for use with Flkt Woods, Rosenberg, Nicotra, Comefri, Ziehl, Ebm-Papst, Gebhardt branded centrifugal fans. ...
The MiniAir 6 is a vane anemometer for measuring the flow velocities of gases with a linear voltage output. The MiniAir 6 provides a 0-2V output relative to flow velocity ranges of up to 20m/s or 40m/s with Micro, Mini and Macro sized turbines. The units require a 6.5-26vDC power ...
MiniAir60 Vane Anemometers for Air Flow Monitoring
The MiniAir 60 is a vane anemometer for measuring the flow velocities of gases with a linear frequency output. The MiniAir 60 provides a 0-4vDC/TTL output relative to flow velocity ranges of up to 20m/s or 40m/s with Micro, Mini and Macro sized turbines. The units require a 4.5-5.5vDC power ...
The MiniAir64 vane anemometers provide a 4-20mA output relative to the flow velocity ranges of up to 20m/s or 40m/s. The units are simple to install or use as part of a fixed system or in conjunction with data loggers, displays or portable indicators. The sensors operate from a 9-24vDC ...
These MiniAir vane anemometers come with Ex certification and provide linear voltage or current outputs relative to the flow velocity ranges of up to 20m/s or 40m/s. Each unit comes with external electronics and EX barrier, with a standard 20m cable between the probe and electronics. The electronics must be ...
MC 4.0 Multiprobe Anemometer with Logger and Display
The MC 4.0 is suitable for determining the flow velocity, temperature and relative humidity of gaseous and liquid media. The measurement with a vane anemometer is considered to be the most accurate of the possible measurement methods. The MC 4.0 includes an internal logger for up to 1 million readings, ...
MiniAir20 Eex Portable Vane Anemometer with Display for Hazardous Areas
The MiniAir20 Eex universal anemometer is suitable for measuring the velocity of gaseous media plus air & surface temperature in a hazardous areas. The display provides an instantaneous value measurement with freely selectable average value measuring intervals, from 2 seconds up to 2 hours. Hazardous Area Approved ...
The MC 4.0 is suitable for the measurement of very low air flows, as well as air temperature and humidity readings. The measurement with a thermoelectric anemometer with uni-directional or omni-directional probe with flow ranges as low as 1 or 5m/s. The MC 4.0 includes an internal logger for up ...
ThermoAir 6 & 64 Hot Wire Anemometer with 0-1V or 4-20mA Output
The ThermoAir 6 and 64 anemometers are ideal for low air flow measurement with high resolution (0.01-5m/s) where an analogue output is required to interface with external systems such as PLC's data loggers or BMS systems. Features include automatic zero point calibration and temperature compensation from 0-40°C. ...
The MC 4.0 ManoAir is part of the MC 4.0 range but comes with a pressure sensor module that allows the unit to measure absolute or differential pressure. The MC 4.0 ManoAir includes an internal logger for up to 1 million readings, Bluetooth connectivity and pressure module for connecting 2 ...
The Lab 4.0 is an instrument suitable for gas analysis in all laboratorial activities. The instrument can be used for differential pressure manometer for very small measuring areas, Particle Measurement System or Environmental Gas Analysis with Volatile Organic Compound (VOC) and Indoor Air Quality (IAQ) Sensors, plus ambient sensors for ...
The TMS3000 is designed for air flow measurement for ventilation control in road tunnels. The TMS3000 system is specifically designed for working under conditions prevailing in road tunnels. In the road tunnel area only robust mechanical sensors made of stainless steel are used and the the signal processing electronics are ...
The MiniAir anemometers with plastic anemometer heads are designed with snap on heads that can be replaced on site without any need for recalibration or adjustment. Replacement snap heads should be of the same original size, flow range and vane material as the original probes. A table is provided on ...
AV-D Single-Point Multi-Range Air Velocity Transmitter
The AV-D is a single point, insertion, air velocity transmitter with user selectable 0-10vDC or 4-20mA outputs and 4 user selectable measurement ranges (0-4m/s, 0-8m/s, 0-16m/s or 0-32m/s). The unit requires a 12-35vDC power supply and has an Insertion length of up to 215mm and probe diameter of 19mm. A flange plate (DPA) is available for adjustment of the penetration depth. The unit has a built-in self test feature and the user can manually override ...
AVT Air Velocity and Temperature Transmitter
The AVT is an all in one air velocity and temperature transmitter suitable for HVAC applications and can be used for measuring air velocity, temperature and air volume in ventilation systems. Air volume is calculated from the air velocity and the duct diameters. Each unit has options of display and relay outputs in addition to the standard dual analogue outputs of 0-10V and 4-20mA for velocity and temperature. ...
Multi-Point Air Velocity Probes & PA267 Differential Pressure Sensor.
A multi-point air velocity probes system using the PA267 differential pressure sensor and AV-EP or AV-MPS air velocity probes. This system can be used to ensure that recommended flow rates for public buildings and industrial plant are achieved. Suitable for flow ranges of 0 - 40m/s. ...
DPT Flow Meter for Fan Control
The DPT Flow is designed for centrifugal fans equiped with inlet rings. The air volume flow measurement is based on differential pressure value measured from the fan. Suitable for use with Flkt Woods, Rosenberg, Nicotra, Comefri, Ziehl, Ebm-Papst, Gebhardt branded centrifugal fans. ...
MiniAir6 Vane Anemometers for Air Flow Monitoring
The MiniAir 6 is a vane anemometer for measuring the flow velocities of gases with a linear voltage output. The MiniAir 6 provides a 0-2V output relative to flow velocity ranges of up to 20m/s or 40m/s with Micro, Mini and Macro sized turbines. The units require a 6.5-26vDC power supply and the standard plastic, Aluminium probes can be used up to 80°C, with units available with separate electronics and Steel probes suitable for up ...
MiniAir60 Vane Anemometers for Air Flow Monitoring
The MiniAir 60 is a vane anemometer for measuring the flow velocities of gases with a linear frequency output. The MiniAir 60 provides a 0-4vDC/TTL output relative to flow velocity ranges of up to 20m/s or 40m/s with Micro, Mini and Macro sized turbines. The units require a 4.5-5.5vDC power supply and the standard plastic, Aluminium probes can be used up to 80°C, with units available with separate electronics and Steel probes suitable for up ...
MiniAir64 Vane Anemometers for Air & Gas Flows
The MiniAir64 vane anemometers provide a 4-20mA output relative to the flow velocity ranges of up to 20m/s or 40m/s. The units are simple to install or use as part of a fixed system or in conjunction with data loggers, displays or portable indicators. The sensors operate from a 9-24vDC power supply. The operating temperatures of the standard MiniAir64 probe is -10 to +80°C. High temperature units can be supplied with external electronics and probe ...
MiniAir Vane Anemometers with Ex Certification
These MiniAir vane anemometers come with Ex certification and provide linear voltage or current outputs relative to the flow velocity ranges of up to 20m/s or 40m/s. Each unit comes with external electronics and EX barrier, with a standard 20m cable between the probe and electronics. The electronics must be located in a safe area with probes in the hazardous zone. The units are simple to install or use as part of a fixed system ...
MC 4.0 Multiprobe Anemometer with Logger and Display
The MC 4.0 is suitable for determining the flow velocity, temperature and relative humidity of gaseous and liquid media. The measurement with a vane anemometer is considered to be the most accurate of the possible measurement methods. The MC 4.0 includes an internal logger for up to 1 million readings, and options for connecting 2 sensors. As a further bonus, the periodic calibration of the MC 4.0 only requires the renewal of the measuring heads. ...
MiniAir20 Eex Portable Vane Anemometer with Display for Hazardous Areas
The MiniAir20 Eex universal anemometer is suitable for measuring the velocity of gaseous media plus air & surface temperature in a hazardous areas. The display provides an instantaneous value measurement with freely selectable average value measuring intervals, from 2 seconds up to 2 hours. Hazardous Area Approved ...
MC 4.0 ThermoAir Hot Wire Anemometer
The MC 4.0 is suitable for the measurement of very low air flows, as well as air temperature and humidity readings. The measurement with a thermoelectric anemometer with uni-directional or omni-directional probe with flow ranges as low as 1 or 5m/s. The MC 4.0 includes an internal logger for up to 1 million readings and port for connecting a separate temperature and humidity probe. As a further bonus, extramodules are available to convert the MC ...
ThermoAir 6 & 64 Hot Wire Anemometer with 0-1V or 4-20mA Output
The ThermoAir 6 and 64 anemometers are ideal for low air flow measurement with high resolution (0.01-5m/s) where an analogue output is required to interface with external systems such as PLC's data loggers or BMS systems. Features include automatic zero point calibration and temperature compensation from 0-40°C. ...
MC 4.0 ManoAir Pressure Gauge
The MC 4.0 ManoAir is part of the MC 4.0 range but comes with a pressure sensor module that allows the unit to measure absolute or differential pressure. The MC 4.0 ManoAir includes an internal logger for up to 1 million readings, Bluetooth connectivity and pressure module for connecting 2 sensors. The pressure modules are used for precise flow and differential pressure measurement of gaseous media on filters and in pitot tubes in the ventilation ...
Lab 4.0 Manometer
The Lab 4.0 is an instrument suitable for gas analysis in all laboratorial activities. The instrument can be used for differential pressure manometer for very small measuring areas, Particle Measurement System or Environmental Gas Analysis with Volatile Organic Compound (VOC) and Indoor Air Quality (IAQ) Sensors, plus ambient sensors for barometric pressure, temperature and humidity. ...
Tunnel Air Flow Measurement TMS3000
The TMS3000 is designed for air flow measurement for ventilation control in road tunnels. The TMS3000 system is specifically designed for working under conditions prevailing in road tunnels. In the road tunnel area only robust mechanical sensors made of stainless steel are used and the the signal processing electronics are located in a separate control room. ...
MiniAir Replacement Snap Heads
The MiniAir anemometers with plastic anemometer heads are designed with snap on heads that can be replaced on site without any need for recalibration or adjustment. Replacement snap heads should be of the same original size, flow range and vane material as the original probes. A table is provided on this page to allow you to select the correct replacement snap head for your MiniAir probe. ...
AV-D Single-Point Multi-Range Air Velocity Transmitter
The AV-D is a single point, insertion, air velocity transmitter with user selectable 0-10vDC or 4-20mA outputs and 4 user selectable measurement ranges (0-4m/s, 0-8m/s, 0-16m/s or 0-32m/s). The unit requires a 12-35vDC power supply and has an Insertion length of up to 215mm and probe diameter of 19mm. A ...
The AVT is an all in one air velocity and temperature transmitter suitable for HVAC applications and can be used for measuring air velocity, temperature and air volume in ventilation systems. Air volume is calculated from the air velocity and the duct diameters. Each unit has options of display and ...
Multi-Point Air Velocity Probes & PA267 Differential Pressure Sensor.
A multi-point air velocity probes system using the PA267 differential pressure sensor and AV-EP or AV-MPS air velocity probes. This system can be used to ensure that recommended flow rates for public buildings and industrial plant are achieved. Suitable for flow ranges of 0 - 40m/s. ...
The DPT Flow is designed for centrifugal fans equiped with inlet rings. The air volume flow measurement is based on differential pressure value measured from the fan. Suitable for use with Flkt Woods, Rosenberg, Nicotra, Comefri, Ziehl, Ebm-Papst, Gebhardt branded centrifugal fans. ...
The MiniAir 6 is a vane anemometer for measuring the flow velocities of gases with a linear voltage output. The MiniAir 6 provides a 0-2V output relative to flow velocity ranges of up to 20m/s or 40m/s with Micro, Mini and Macro sized turbines. The units require a 6.5-26vDC power ...
MiniAir60 Vane Anemometers for Air Flow Monitoring
The MiniAir 60 is a vane anemometer for measuring the flow velocities of gases with a linear frequency output. The MiniAir 60 provides a 0-4vDC/TTL output relative to flow velocity ranges of up to 20m/s or 40m/s with Micro, Mini and Macro sized turbines. The units require a 4.5-5.5vDC power ...
The MiniAir64 vane anemometers provide a 4-20mA output relative to the flow velocity ranges of up to 20m/s or 40m/s. The units are simple to install or use as part of a fixed system or in conjunction with data loggers, displays or portable indicators. The sensors operate from a 9-24vDC ...
These MiniAir vane anemometers come with Ex certification and provide linear voltage or current outputs relative to the flow velocity ranges of up to 20m/s or 40m/s. Each unit comes with external electronics and EX barrier, with a standard 20m cable between the probe and electronics. The electronics must be ...
MC 4.0 Multiprobe Anemometer with Logger and Display
The MC 4.0 is suitable for determining the flow velocity, temperature and relative humidity of gaseous and liquid media. The measurement with a vane anemometer is considered to be the most accurate of the possible measurement methods. The MC 4.0 includes an internal logger for up to 1 million readings, ...
MiniAir20 Eex Portable Vane Anemometer with Display for Hazardous Areas
The MiniAir20 Eex universal anemometer is suitable for measuring the velocity of gaseous media plus air & surface temperature in a hazardous areas. The display provides an instantaneous value measurement with freely selectable average value measuring intervals, from 2 seconds up to 2 hours. Hazardous Area Approved ...
The MC 4.0 is suitable for the measurement of very low air flows, as well as air temperature and humidity readings. The measurement with a thermoelectric anemometer with uni-directional or omni-directional probe with flow ranges as low as 1 or 5m/s. The MC 4.0 includes an internal logger for up ...
ThermoAir 6 & 64 Hot Wire Anemometer with 0-1V or 4-20mA Output
The ThermoAir 6 and 64 anemometers are ideal for low air flow measurement with high resolution (0.01-5m/s) where an analogue output is required to interface with external systems such as PLC's data loggers or BMS systems. Features include automatic zero point calibration and temperature compensation from 0-40°C. ...
The MC 4.0 ManoAir is part of the MC 4.0 range but comes with a pressure sensor module that allows the unit to measure absolute or differential pressure. The MC 4.0 ManoAir includes an internal logger for up to 1 million readings, Bluetooth connectivity and pressure module for connecting 2 ...
The Lab 4.0 is an instrument suitable for gas analysis in all laboratorial activities. The instrument can be used for differential pressure manometer for very small measuring areas, Particle Measurement System or Environmental Gas Analysis with Volatile Organic Compound (VOC) and Indoor Air Quality (IAQ) Sensors, plus ambient sensors for ...
The TMS3000 is designed for air flow measurement for ventilation control in road tunnels. The TMS3000 system is specifically designed for working under conditions prevailing in road tunnels. In the road tunnel area only robust mechanical sensors made of stainless steel are used and the the signal processing electronics are ...
The MiniAir anemometers with plastic anemometer heads are designed with snap on heads that can be replaced on site without any need for recalibration or adjustment. Replacement snap heads should be of the same original size, flow range and vane material as the original probes. A table is provided on ...
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
