A range of Tinytag PT1000 temperature probes for use with Tinytag data loggers. Designed to meet the demands of a wide variety of applications with a wider temperature range than thermistor probes. This range of probes includes high temperature probes with heavy duty over braided cable, oven probes and freezer probes. Probes in this range have a variety of IP ratings up to IP68 (waterproof) and therefore can be used in damp or submerged applications.
Tinytag PT1000 temperature probes are designed for applications where reliable, low temperature readings need to be taken. Specifically deep freeze or cryogenic applications. Click the part number or picture for more details on specific probe, opens in same tab.
PB-7002 – A PT1000 Cryogenic probe for use with the Tinytag Plus 2 TGP-4205 and Tinytag View 2 TV-4204 data loggers. This probe is specially designed for use in low (cryogenic) temperature applications where the tip of the probe (NOT handle & cable) can be exposed to temperatures as low as -200°C. The probe is 150mm long and 5mm in diameter with a 1.5m or 3m cable. Temperature range -200 to +100°C with a 15 second response time.
PB-7003 – A PT1000 Freezer probe for use with the Tinytag Plus 2 TGP-4205 and Tinytag View 2 TV-4204 data loggers. This probe is specially designed for use in applications where the probe and cable can be exposed to temperatures as low as -80°C. The probe is 150mm long and 5mm in diameter with a 1.5m, 3m or 5m cable. Temperature range -80 to +100°C with a 20 second response time.
PB-7005 – The PB-7005 is a Cryogenic PT1000 probe with a flat cable designed to pass through a fridge or freezer door seals with minimal effect. The Stainless Steel PT1000 probe is suitable for use with the Tinytag Plus 2 TGP-4205 and Tinytag View 2 TV-4204 data loggers. The probe and cable were specially designed to survive exposed to extreme temperatures as low as -200°C and as high as 150°C. The probe is 50mm long and 6mm in diameter with a 1.5m or 3m cable. Class B PT1000 Temperature range -200 to +150°C with a 5 minute response time.
PB-7006 – The PB-7006 is a general purpose stainless steel probe with a flat cable designed to pass through a fridge or freezer door seals with minimal effect. The PT1000 Wide Range probe is suitable for use with the Tinytag Plus 2 TGP-4205 and Tinytag View 2 TV-4204 data loggers. The probe and cable were specially designed to survive exposed to temperatures as low as -80°C and as high as 250°C. The probe is 50mm long and 6mm in diameter with a 1.5m or 3m cable. Class A PT1000 Temperature range -80 to +250°C with a 5 minute response time.
All response times based on probe response to 90% FSD changes.
If none of the Tinytag PT1000 temperature probes are suitable for your application, please look through our temperature sensor section and we can provide a more suitable PT1000 probe with the ACS-9703 5-Pin Plug for connection to match the Tinytag Logger of your choice. The connector can be used with 2-, 3- or 4-Wire sensors and we can provide custom PT1000 sensor with the probe fitted to match your specific requirements.
Tinytag PT100 Temperature Sensors are available here. There are suitable for high temperatures
PB-7002-1M5
£45.00
PB-7002-3M
£75.00
PB-7003-1M5
£95.00
PB-7003-3M
£105.00
PB-7003-5M
£115.00
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
