omni instruments | sensors and data acquisition equipment

Sales & Technical Support

Edit Content

TSV200-60i

TSV200-60i 1-Wire Single Channel 60V Input Module. Operating range 0-60V with 0.1V Resolution. Powered via 1-Wire Bus @ 68mA. Isolation voltage 1000vDC. Operating conditions: 0 to +40°C @ 0-85%RH (non-condensing). Dimensions: 85 x 35.1 x 23.5mm. Supports multiple sensors on a single bus via its unique 64-bit serial code and screw less terminals.

£54.34

Need help finding the right product?

Downloads

TSV200-60i Voltage Input Module

Description

The TSV200-60i is a cost-effective 1-Wire voltage sensor designed for DC voltage monitoring, featuring a digital output and a galvanically isolated input. Its embedded digital signal processing, handled by a multiprocessor system, provides a calibrated digital output with 10-bit resolution. This sensor is well-suited for various power measurement applications, including telco systems (e.g., -48VDC standard), solar systems, battery monitoring and control, and industrial automation.

The TSV200-60i communicates via a 1-Wire bus, and each sensor is equipped with a unique 64-bit serial number, allowing multiple units to be connected on the same bus. For easy daisy-chaining in multi-sensor systems, it features two RJ11 connectors. The voltage to be measured is conveniently applied to screwless terminal blocks, simplifying installation.

Features

  • Galvanic isolated DC voltage input from 1-Wire interface;
  • 10-bit resolutions;
  • Excellent long-term stability;
  • Low current consumption;
  • Unique 64-Bit serial number for multi-sensors support.

Applications

  • Batteries charge/discharge process monitoring;
  • Galvanic isolated voltage monitoring for industrial processes;
  • Solar panel voltage monitoring;
  • Voltage measurements in telecommunication (telco) systems.

Specifications

Parameter Value
Supply Voltage Range (1-Wire Bus): 4.5 to 5.5V
Maximum Supply Current (1-Wire Bus): 68mA
Input Voltage Range: 0 to 60V
Accuracy: ±2%
Resolution: 0.1V
Isolation Voltage: 1000vDC
Ingress Protection: IP30
Operating Range: 0 to +40°C (0-85%RH Non-Condensing)
Dimensions: 85 x 35.1 x 23.5mm
Weight: 65g
Connectors: Two RJ-11 in parallel

Pinout of RJ-11 Connectors

Pin Description UTP Wire Colour
1 1-Wire Ground White/Brown
2 1-Wire Ground White/Green
3 1-Wire Data Green
4 1-Wire Ground White/Orange
5 1-Wire +VDD Orange
6 1-Wire +VDD Brown

CabU_1m_RJ11

£6.23

1-Wire interface cable with RJ11 connectors. Cable length 1m. The CabU_1m_RJ11 cable can also be used to add one of the 1-Wire sensors with screwless terminals to a network by using the SPL2_RJ11 cable.

CabU_3m_RJ11

£7.60

1-Wire interface cable with RJ11 connectors. Cable length 3m. The CabU_3m_RJ11 cable can also be used to add one of the 1-Wire sensors with screwless terminals to a network by using the SPL2_RJ11 cable.

CabU_30m_RJ11

£24.68

1-Wire interface cable with RJ11 connectors. Cable length 30m, ideal for connecting a single Teracom Ethernet or GSM/LTE I/O module to one of the 1-Wire units with RJ11 connectors.

SPL2_RJ11

£15.08

The SPL2_RJ11 cable can be used to connect the RJ11 connector to a wired network, or connect one of the 1-Wire sensor with screwless terminals to the RJ11 cables    

We are here to help

Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.

Enquire now