Description

The WindUltra Pole Mount can be mounted on a pole with a diameter of 25-26mm

Installation Instructions

1. Ensure the pole is securely fixed and vertical
2. Push the Pole Mount firmly onto the pole and check it is pushed fully onto the polw and level
3. Align the Pole Mount to North.
4. Secure the Pole Mount into place using the Locking Nut. The locking nut can be tightened by hand, or by using a 42mm A/F spanner, Max torque used not exceed 30Nm.
5. Recheck the North Alignment.

Alignment to North Instructions

1. To align the product to North, use the North Alignment Notch/North Alignment Edges on the Pole Mount.
2. Check the North Alignment Marker on the sensor unit after its installation,

Pole mounts incorporate

• a North Alignment Notch which can be use to align the sensor using a pointer or sighting tube.
• a North Alignment Edge that can be used to align the sensor using a compass