Description
The unit consists of a base modem, usually connected to the data logger and a remote unit which is connected to an ROV. To effect data transfer the ROV, using a manipulator drops the remote unit into the docking port. As the modems are transparent data transfer is controlled by the host PC on the surface via the ROV serial link.
Data communications are unaffected by electrical noise or suspended solid particles in the seawater.
- Transfer real time and logged data from subsea logger to an ROV
- Optical non contact RS232 data transfer
- Half duplex transparent data link
- Data transfer rate 9600 to 57600 baud
- Suitable for depths to 4000 metres
- Power consumption 8.5mA @ 12vDC
- Compatible with Datataker DT80 series loggers and all Omni Instruments subsea logging systems
| Baud Rate | Programmable 9600, 19200, 38400, 57600 baud |
| Serial Port | RS232 |
| Power Supply | 9-28vDC |
| Power Consumption | 8.5mA at 12v DC |
| Operating Temperature | 0 to 50 degrees C |
| Data Protocol | Transparent RS232, half duplex |
| Protection | I.P.68 to 4000 metres seawater |
| Housing Material | 316 stainless steel or aluminium |
| Electrical Connector | 8 pole subcon male connector MCBH8M-SS |
|
Baud Rate |
Programmable 9600, 19200, 38400, 57600 baud |
|
Serial Port |
RS232 |
|
Power Supply |
9-28v DC |
|
Power Consumption |
8.5mA at 12vDC |
|
Operating Temperature |
0 to 50 deg C |
|
Data Protocol |
Transparent RS232, half duplex |
|
Protection |
I.P. 68 to 4000 metres seawater |
|
Housing Material |
316 stainless steel or aluminium |
|
Electrical Connector |
8 pole subcon male connector MCBH5M-SS |
