Temperature & Relative Humidity data logger with a USB port for configuration and downloading data. Measurement ranges -35 to +80°C (Typical accuracy 0.45°C) and 0 to 100%RH (Typical accuracy 2.05%RH), memory for 16,382 temperature & 16,382 humidity readings. The replaceable long-life Lithium battery will allow for up to 3 year. The housing provides environmental protection up to IP67 with the cap closed.
£69.98
The EL-USB-2+ is a USB temperature data logger with a measurement range of -35 to +80°C (-31 to +176°F) and 0 to 100%RH. The data logger can store up to 16,382 paired readings of temperature and relative humidity and is supplied with a long-life replaceable 1/2 AA Lithium battery, allowing the unit to log data continually for up to 3 years (depending on logging rate and temperature). The status of EL-USB-2+ is indicated by flashing red, green and orange LEDs. The data logger is protected against moisture to IP67 standard when the protective cap is fitted.
| Temperature Range: | -35 to 80°C (-31 to 176°F) |
| Internal Resolution: | 0.5°C (1°F) |
| Accuracy (overall error): | 0.45°C (0.86°F) |
| Humidity Range: | 0 to 100%RH |
| Internal Resolution: | 0.5%RH |
| Accuracy (overall error): | 2.05%RH |
| Dew Point Accuracy: | 1.5°C |
| Memory (readings): | 16,382 Temperature & 16,382 Humidity |
| Logging Interval | 10 Secs, 1 min, 5 min, 30 min, 1hr, 6hr or 12 hr (selectable) |
| Alarm Thresholds: | 2 (user programmable) |
| Start Date/Time: | Selectable in software |
| Status Indicators (LEDs): | Red, Green and Orange |
| Power: | 3.6V Lithium Battery (½ AA) |
| Battery Life: | 3 Years (at 25°C and 1 min logging) |
| Dimensions: | 108 x 25 x 22mm |
| Operating Temperature Range: | -35 to +80°C (-31 to 176F) |
The EL-USB-2+ temperature data logger is suitable for a wide variety of applications, these include but are not limited to:
The EasyLog USB control software is available as a free download from here. The software is easy to install and use, plus is compatible with 32-bit and 64-bit versions of Windows 7, 8 and 10. The software is used to set up the logger, alarms, download, graph and annotate data or export in Excel, PDF and jpeg formats. It is also possible to set the alarm to remain active, even if the reading has returned to normal, in which case the alarm LED will continue to flash red. This ‘Hold’ feature in the software ensures the user is notified that at some point an alarm level has been exceeded, without needing to download the data.
The software allows the following parameters to be configured:
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
