Description
FEATURES
- Supports both GPS and GLONASS satellites for complete redundancy
- Heading accuracy < 0.5° rms
- Position accuracy < 1.0m 95% confidence (DGPS)
- An integrated 9 Axis Inertial Measurement Core (IMC technology) provides enhanced roll, tilt and heading stability even during momentary loss of satellite signals
- G3 color display system (optional)
- Engineered enhancements to exceed sealed IP67 rating
- Extended 2 year warranty
- NMEA 0183 and NMEA 2000® interface
- Heave, Pitch, Roll and Rate of Turn as standard output
- Heading updates 1 to 20 Hz
- BAUD Rate selectable: 4800, 9600, 19200, 38400,115200
- Fully compatible with on board NMEA 0183 and NMEA 2000® RADAR, ECDIS, AIS, Cameras, SONAR, PC and Autopilots
- Compact integrated surface mounting and pole mount
- Pre-programmed default settings for Heading, Rate of Turn, Course over Ground, Lat/Long position, Time & Date
- 15 meter serial cable standard (30 meter optional)
- 6 meter NMEA 2000® Cable (Optional)
- CE certified for EMI and RFI immunity
- Worldwide service
SPECIFICATIONS: | |
Receiver Type: | L1, C/A code, with carrier phase smoothing |
Channels: | Two x 32 parallel tracking GPS, GLONASS, SBAS Update Rate: Standard 10Hz, Selectable up to 20 Hz (position and heading) |
Horizontal Accuracy: | < 0.5m 95% confidence (DGPS)* < 2.5m 95% confidence (autonomous, no SA)** |
Heading Accuracy: | < 0.5° rms |
Pitch / Roll Accuracy: | < 1° rms |
Heave Accuracy: | < 30 cm rms |
Rate of Turn: | 90º / sec max |
Start-up Time: | < 60 sec typical |
Heading Fix: | < 10 sec |
Satellite Reacquisition: | < 1 sec |
COMMUNICATIONS | |
Serial Ports: | 1 full duplex R2-232 and 1 full duplex RS-422 |
Baud Rates: | Selectable4800 – 115200 |
Correction I/O Protocol: | RTCM SC-104 |
Data I/O Protocol: | NMEA 0183, NMEA 2000®, CAN |
NMEA Heading Messages: | $GPHDT, $HEHDT, $HEHDM, $GPROT,$GHEROT, $GPGGA, $GPGSV, $GPVTG, $GPRMC, $GPZDA, $PASHR |
ENVIRONMENTAL | |
Operating Temperature: | -32ºC to +74ºC (-25ºF to + 165ºF) |
Storage Temperature: | -40ºC to +85ºC (-40ºF to + 185ºF) |
Humidity: | 0 – 95% non-condensing |
EMC: | FCC Part 1.5, Subpart B, Class B, CISPR22, CE |
POWER | |
Input Voltage: | 10 to 36 VDC |
Power Consumption: | ~ 2.8 W nominal |
Current Consumption: | ~ 240 mA @ 12 VDC |
Isolation: | Power supply isolated from serial ports |
Reverse Polarity Protect: | Yes |
AIDING DEVICES | |
Gyro: | Provides reliable < 1º Heading for up to 3minutes when loss of GPS has occurred |
Tilt Sensor: | Assists in fast start up of heading solutions |
* Depends on multipath environment, number of satellites in view, satellite geometry, baseline length (for local services), and Ionospheric activity. | |
** Depends on multipath environment, number of satellites in view, and satellite geometry |
OMC-140 Display Option