The LPMS-CURS3 is an OEM version of the LPMS Motion Sensor. The sensor is supplied without a housing and is ideal for integration with your own devices. All version support USB communications and can is available with either a RS232, TTL Serial or CANBus interface. The sensors include triple axis accelerometer, gyro and magnetometer sensors and an integral Kalman filter to provide full orientation data via USB, or RS232/TTL/CANBus serial connection. Quaternion or Euler angles, plus raw sensor measurements for x, y, z acceleration, pitch, roll yaw rate of turn and magnetometer data. Firmware is available to also provide Heave motion.
LPMS-CURS3 is a high performance miniature inertial measurement unit (IMU) with multiple communication interfaces. Integrating CANBus, USB and UART, the LPMS-CURS3 perfectly fits both machine and human motion measurements for size and cost sensitive applications. LPMS-CURS3 is shipped without a housing and is ideal for integration with your own device. All versions include USB communication with an option to include one serial interface (RS232, TTL, or CANBus) set by the factory.
| Wired Interface | CANBus | UART: RS232/TTL | USB |
| Communications Protocol | LP-CAN/CANOpen | LP-BUS | |
| Max Baud Rate | 1MBit/s | 921/6Kbit/s | 921Kbit/s |
| Orientation Range |
Roll: ±180°; Pitch ±90°; Yaw: ±180° | ||
| Accelerometer | 3-Axis, ±2/±4/±8/±16g, 16 Bits | ||
| Gryoscope | 3 Axis, ±125/±245/±500/±1000/±2000 dsp, 16 Bits | ||
| Magnetometer | 3-Axis, ±4/±8/±12/±16 gauss, 16 Bits | ||
| Data Output Format | Raw Data / Euler Angle / Quaternion | ||
| Data Output Rate | Up to 400Hz | ||
| Pressure Sensor | Available on request, Range 300-1100hPa | ||
| Power Supply | 5-15vDC, 3.3V On request | 5vDC | |
| Power Consumption | <182mW @ 3.3V | ||
| Connector | Header Pitch 1.27mm | Micro USB-B | |
| Dimensions | 22 x 28 x 7.9mm | ||
| Weight | 3.1g | ||
| Operating Temperature Range | -40 to +80°C | ||
LPMS-CURS3-CAN
£203.72
LPMS-CURS3-RS232
£203.72
LPMS-CURS3-TTL
£203.72
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
