Downloads
Description
The P500 has a rugged stainless steel body and shaft for long service life and environmental resistance. The mounting flange is anodised aluminium. The sensor is easy to install with flange or servo mounting options, it also offers a wide range of electrical options. Sealing is IP65 or IP67 depending on selected cable or connector options, and full EMC protection built in. It is particularly suitable for OEMs seeking good sensor performance for arduous applications such as industrial machinery where cost is important. Overall performance, repeatability and stability are outstanding over a wide temperature range.
Specifications
| Dimensions | Â | ||
|
Body Diameter
|
35mm | ||
|
Body Length (to seal face)
|
44mm standard, 50mm buffered | ||
|
Shaft
|
15mm, OD 6mm | ||
|
Â
|
For full mechanical details see drawing | ||
|
Measurement range |
Any angle from ±10° to ±80° | ||
|
Independant Linearity |
<±0.25% for 100° | ||
|
Temperature Coefficient |
<±0.01%/°C Gain & <±0.01%FS/°C Offset | ||
|
Typical Overall Accuracy |
<±0.5% FSO | ||
|
Resolution |
Infinite | ||
|
Noise |
<0.02% FSO | ||
|
Shaft Torque |
<20mNm Static | ||
|
Frequency Response |
>10KHz (-3dB); | ||
| Â | >300Hz (-3dB); 2 wire 4-20mA | ||
| Â | Â | ||
|
Output Signal and Output Load |
|
||
|
 |
|
||
|
 |
|
||
|
 |
|
||
|
 |
|
||
|
 |
|
||
|
 |
|
||
|
 |
|
||
|
 |
|
||
|
Supply Current |
|
||
| Â | Â | ||
|
Temperature Limits |
 | ||
|
Operating |
-40 to +125°C (5V input only) | ||
|  | -20 to +85°C | ||
|
Storage |
-40 to +125°C | ||
|
EMC Performance |
 | ||
|
Susceptibility |
EN 61000-6-2 | ||
|
Radiated |
EN 61000-6-3 | ||
|
 |
 | ||
|
Vibration |
IEC 68-2-6: 10g | ||
|
Shock |
IEC 68-2-29: 40 g | ||
|
MTBF |
350,000 hrs 40°C Gf | ||
|
Sealing |
IP65(connector) / IP67(cable) | ||
|
 |
 | ||
|
Electrical Connections |
Screened 3 core cable or integral connector |
When using the part builder below options marked with * must have an item selected to complete the correct part number.