Energy Monitoring Systems

The EL-USB-3 data loggers are suitable for measuring and storing up to 32,510 DC voltage readings over a measurement range of 0-30vDC. The data logger features a pair of screw terminals and crocodile clip connectors for connecting the voltage signal to the logger. Removing the protective cap with the screw terminals then allows the logger to simply plug into a USB port for configuration and downloading of the collected data. The included software allows the data to be graphed, printed and exported to other applications. The internal battery is a replaceable long-life Lithium battery, which can provide up to 3 years operation.

These Tinytag Plus 2 loggers are designed to monitor standard mA or vDC inputs in the ranges of 0-25mA, 0-2.5 and 0-25vDC. The TGP-4703 cover a voltage range of 0-2.5vDC and the TGP-4704 0-25vDC. The TGP-4804 covers a current range of 0-25mA. The unit has a waterproof case and features high reading resolution and accuracy, a large memory, a fast offload speed and a low battery monitor. These units are supplied with a 1m long input lead with flying leads for easy connection.

A data logger, housed in a rugged case, supplied with a Chauvin Arnoux Current Clamp . This unit is ideal for mains and power consumption monitoring. Memory 32,000 readings with 2 programmable alarms. Logging rate 1 sec to 10 days, reading range 0.15 to 200A AC and frequency 40Hz to 10kHz. Trigger & delayed start. Robust IP68 case makes these ideal for tough, industrial environments.

The TV-4810 measures current from 0 to 200A AC and is ideal for mains and power consumption monitoring. As well as recording data the unit has a display that shows what the unit is currently reading. The unit has an IP65 case and features high reading resolution and accuracy, a large memory, a fast offload speed and a low battery monitor. This unit is supplied with a current clamp suitable for conductor sizes up to 20mm.

GSKIN U-value Kit are a plug and play solution to allow for the remote measurement of U-value (W/(mK)), heat flux (W/m²), and 2 temperatures (°C). The kit combines a GSKIN heat flux sensor with a custom designed miniature MSR logger and two external temperature sensors on 1 & 5m cables. The logger has an internal memory for up to 2 million readings and can be left to log the data, or in a live operation mode for a real time investigation. Each kit consists of a logger, sensors, USB cable, carry case and software. The logger is configured with the calibration data for the individually supplied sensors.

Utilizing the SQ2010 data logger, along with AC current clamps, AC voltage sensors and kWh sensors this system can be used to monitor electrical power consumption on single phase or multiphase supplies.

The Tinytag Energy Logger can be used to monitor single and three phase energy supplies and is very simple and easy to use portable energy logger. Current measurements are taken using flexible non-invasive coils for quick and easy installation. The unit provides 6 weeks continuous logging at 5 minute intervals. Each unit is supplied with a carry case, three current coils (available in 3 different sizes), UK and EU mains leads, a USB cable, a copy of the Tinytag Explorer software and a user manual.

The GENII wireless energy monitoring system is able to cover a wide range of parameters. Transmitters are available for direct connections to ND-350 Power meters, U6 Gas meters, various heat meters, flow meters and other energy monitoring devices. A system can be customised to your requirements, with battery or externally powered transmitters to cover any parameter and can be linked up to a GEN II Environmental Monitoring System to cover all your monitoring in one complete system. Up to 250 channels can be sent back to a single receiver logger unit over a 2-3Km range, with repeaters available to extend this range and deal with more difficult environments. The receiver logger will read the data from only the desired transmitters in range and multiple systems can be installed in one location to provide all the parameters into an easy to use format for data analysis.

The GRD Solar Panel Efficiency Monitoring System measures solar radiation, solar power output (DC voltage and current or water temperature), and current weather data such as air temperature, wind speed etc. and delivers the data wirelessly using GPRS to a secure web page.

The Smappee Infinity system is an easy-to-use energy monitoring system for both residential and commercial applications. Supporting current measurements up to 10,000 amps as well as single, split, and three-phase systems.