Omni Instruments
contact icon+44 (0) 845 9000 601
+44 (0) 1382 443000
WE ARE HERE TO HELP

Contact our technical sales team now to discuss your requirements

help icon
MY BASKET basket arrow

£0.00

My Cart

You have no items in your shopping cart.

Click basket to edit.

Products

Latest added news blog
FRIGGA A90 Cold Chain Temp & GPS Logger
Kenny Laidlaw
May 21,2019
The FRIGGA A90 is a disposable USB cold chain data logger suitable for monitoring temperature and lo...read more >
FRIGGA A90 Cold Chain Temp & GPS Logger

FRIGGA A90 Cold Chain Temp & GPS Logger

The FRIGGA A90 is a disposable USB cold chain data logger suitable for monitoring temperature and location data. The A90 includes an integrated global roaming SIM card to provide LBS base station positioning for location data and to send readings to the FRIGGA Cloud. Each logger includes a unique device ID and activation code for creating a Cloud account. The Cloud account can be used to configure the logging and reporting intervals, as well as the required alarming points and the relevant SMS and email contact to send alarm messages to. The loggers also include a USB port to download readings and will allow access to the device, even after the battery has been depleted. SIM card does not require any topping up and should last as long as the unit requires.

 

Features

  • Full cold chain visibility (location, temperature and track routes) via Frigga cloud
  • GSM network connected device, supplied with Global roaming SIM card
  • Real-time alerts via SMS and email.
  • Online Frigga Cloud account for each device
  • Start & Stop button,
  • Flight mode to disable GSM

The activation for the FRIGGA Cloud account is on the back of the device and will allow you to configure the logger online, without the need to open the sealed packet the unit is delivered in. The GSM network connectivity will ensure data is continuously uploaded to the cloud account, allowing temperature and location information constantly accessible to you via the online account.

FRIGGA Cloud Account

Instructions

FRIGGA A90 Diagram

Start :

Long press “Start/Stop” button till red & blue LED indicators flash, the device is ready. Start delay is 30 min. (In this stage blue led will flash every 10 sec.), after delay time, the LED stop and the device start to record the temperature data. (Using default thresholds).

Setting :

Thresholds can be changed via cloud platform. On the page “Device Setting”, we can:

1. Change the temperature thresholds
2. Add alarm notification personnel
3. Share equipment to someone
4. Setting position notification

Transport :

Put the device into the goods and begin to transport.

Throughout the transportation, please maintain Frigga A90 in its seal state. (Do not tear open the package, until final download).

Monitoring :

Whether you set up the equipment or not, you also can monitor the temperature, location, route on the cloud platform.

1. When the temperature is over limit, the cloud platform will notify the relevant person by mail or SMS
2. Notify the presupposed person when the equipment reaches the designated
3. When the equipment arrives near the designated airport, the device will enter the flight mode

Stop :

Three ways to end journey:

1. Long press “Start/Stop” button till red & blue LED indicators flash, the device is ending.
2. Tear open the wrapping, plug in the logger into PC
3. Via cloud platform, inform the device to stop, and the device will respond within one hour in a good signal environment.

Report :

1. When stop record  data, device  will  generate  PDF report Via USB connect with PC, can access it directly.
2. On the Frigga cloud platform, the whole transportation data will be backed up, and can be viewed through device ID and transportation time.

Further information on the FRIGGA A90 Cold Chain Logger can be found on our webshop here