Float Switches

Fuel level float switch, overhead suspension type, with 5 metres of cable, contact rated at up to 3 amps, 250 VAC, suitable for clean or dirty water, fuel oil, tank levels, channels etc.

Liquid level float switch, overhead suspension type, with 5 metres of cable, contact rated at up to 10 amps, 250 VAC, suitable for clean or dirty water, tank levels, channels etc.

A vertical float switch with an integral float magnet and an M8 x 1.25mm pitch thread with a choice of normally open or normally closed contacts. Capable of switching up to 200vDC at 10VA. With a 300mm cable length. Ideally suited to liquid and air conditioning condensate and industrial process control applications.

Single pole float switch suitable for use with most liquids with a minimum specific gravity of 0.8. The sensors have an Acetal housing and Polypropylene float making this sensor suitable for use in drinking water, fuel or organic solvent applications. The float orientation determines whether the unit is normally open or normally closed allowing the sensors to be used for both switching on and off equipment. The sensor is designed for side entry mounting with a push fitting EPDM sealing grommet and 100mm PVC cable. Power rating 250vAC at 1 Amp, up to a maximum 15 Watts. Operating temperature up to +60°C.