Page 2 | Open Area, Tunnel & Duct Air Flow Monitoring

The MC 4.0 is suitable for the measurement of very low air flows, as well as air temperature and humidity readings. The measurement with a thermoelectric anemometer with uni-directional or omni-directional probe with flow ranges as low as 1 or 5m/s. The MC 4.0 includes an internal logger for up to 1 million readings and port for connecting a separate temperature and humidity probe. As a further bonus, extramodules are available to convert the MC 4.0 for vane anemometers, or differential pressure pitot tubes.

The MC 4.0 ManoAir is part of the MC 4.0 range but comes with a pressure sensor module that allows the unit to measure absolute or differential pressure. The MC 4.0 ManoAir includes an internal logger for up to 1 million readings and pressure module for connecting 2 sensors. The pressure modules are used for precise flow and differential pressure measurement of gaseous media on filters and in pitot tubes in the ventilation duct. They are used in heating, ventilation and air conditioning as well as in clean rooms. Two pressure modules are available for the measuring ranges ±2000 Pa and ±20 kPa, which can be exchanged with a single movement.

The MC 4.0 ManoAir is the replacement for the ManoAir 100 Digital Manometer.

The Lab 4.0 is an instrument suitable for gas analysis in all laboratorial activities. The instrument can be used for differential pressure manometer for very small measuring areas, Particle Measurement System or Environmental Gas Analysis with Volatile Organic Compound (VOC) and Indoor Air Quality (IAQ) Sensors, plus ambient sensors for barometric pressure, temperature and humidity.