Open Area, Tunnel & Duct Air Flow Monitoring

MiniAir 6 Vane Anemometers with 0-2V Output

MiniAir6 Vane Anemometers for Air Flow Monitoring

The MiniAir 6 is a vane anemometer for measuring the flow velocities of gases with a linear voltage output. The MiniAir 6 provides a 0-2V output relative to flow velocity ranges of up to 20m/s or 40m/s with Micro, Mini and Macro sized turbines. The units require a 6.5-26vDC power supply and the standard plastic, Aluminium probes can be used up to 80°C, with units available with separate electronics and Steel probes suitable for up to 250°C. The sensors are simple to install and can be easily integrate into a fixed system with other instrumentation including data loggers or displays.

Price range : £47.67 - £1,067.85

MiniAir60 Vane Anemometers for Air Flow Monitoring

The MiniAir 60 is a vane anemometer for measuring the flow velocities of gases with a linear frequency output. The MiniAir 60 provides a 0-4vDC/TTL output relative to flow velocity ranges of up to 20m/s or 40m/s with Micro, Mini and Macro sized turbines. The units require a 4.5-5.5vDC power supply and the standard plastic, Aluminium probes can be used up to 80°C, with units available with separate electronics and Steel probes suitable for up to 250°C. The sensors are simple to install and can be easily integrate into a fixed system with other instrumentation including data loggers or displays.

Price range : £562.53 - £886.70

MiniAir64 Vane Anemometers for Air & Gas Flows

The MiniAir64 vane anemometers provide a 4-20mA output relative to the flow velocity ranges of up to 20m/s or 40m/s. The units are simple to install or use as part of a fixed system or in conjunction with data loggers, displays or portable indicators. The sensors operate from a 9-24vDC power supply. The operating temperatures of the standard MiniAir64 probe is -10 to +80°C. High temperature units can be supplied with external electronics and probe operating temperature ranges up to 140°C.

Price range : £47.67 - £1,144.13

MiniAir Vane Anemometers with Ex Certification

These MiniAir vane anemometers come with Ex certification and provide linear voltage or current outputs relative to the flow velocity ranges of up to 20m/s or 40m/s. Each unit comes with external electronics and EX barrier, with a standard 20m cable between the probe and electronics. The electronics must be located in a safe area with probes in the hazardous zone. The units are simple to install or use as part of a fixed system or in conjunction with data loggers, displays or portable indicators located in the safe area.

Hazardous Area Approved

Price range : £2,535.29 - £3,518.18

MC 4.0 Multiprobe Anemometer with Logger, Display and Bluetooth.

MC 4.0 Multiprobe Anemometer with Logger and Display

The MC 4.0 is suitable for determining the flow velocity, temperature and relative humidity of gaseous and liquid media. The measurement with a vane anemometer is considered to be the most accurate of the possible measurement methods. The MC 4.0 includes an internal logger for up to 1 million readings, and options for connecting 2 sensors. As a further bonus, the periodic calibration of the MC 4.0 only requires the renewal of the measuring heads. This means that the device does not need to be sent in as with comparable products. Vane anemometers are available with plastic sensors that can be used for non-aggressive gases or liquids and Steel sensors suitable for use in aggressive media or higher temperature ranges.

The MC 4.0 is the replacement for the MC20 display.

Price range : £32.93 - £2,536.14

MiniAir20 Eex Portable Vane Anemometer with Display for Hazardous Areas

The MiniAir20 Eex universal anemometer is suitable for measuring the velocity of gaseous media plus air & surface temperature in a hazardous areas. The display provides an instantaneous value measurement with freely selectable average value measuring intervals, from 2 seconds up to 2 hours.

Hazardous Area Approved

Price range : £4.50 - £2,345.46

MC 4.0 ThermoAir Hot Wire Anemometer

The MC 4.0 is suitable for the measurement of very low air flows, as well as air temperature and humidity readings. The measurement with a thermoelectric anemometer with uni-directional or omni-directional probe with flow ranges as low as 1 or 5m/s. The MC 4.0 includes an internal logger for up to 1 million readings and port for connecting a separate temperature and humidity probe. As a further bonus, extramodules are available to convert the MC 4.0 for vane anemometers, or differential pressure pitot tubes.

£0.00

ThermoAir 6 & 64 Hot Wire Anemometer with 0-1V or 4-20mA Output

The ThermoAir 6 and 64 anemometers are ideal for low air flow measurement with high resolution (0.01-5m/s) where an analogue output is required to interface with external systems such as PLC's data loggers or BMS systems. Features include automatic zero point calibration and temperature compensation from 0-40°C.

Price range : £1,964.08 - £2,374.06

MC 4.0 ManoAir Pressure Gauge

The MC 4.0 ManoAir is part of the MC 4.0 range but comes with a pressure sensor module that allows the unit to measure absolute or differential pressure. The MC 4.0 ManoAir includes an internal logger for up to 1 million readings and pressure module for connecting 2 sensors. The pressure modules are used for precise flow and differential pressure measurement of gaseous media on filters and in pitot tubes in the ventilation duct. They are used in heating, ventilation and air conditioning as well as in clean rooms. Two pressure modules are available for the measuring ranges ±2000 Pa and ±20 kPa, which can be exchanged with a single movement.

The MC 4.0 ManoAir is the replacement for the ManoAir 100 Digital Manometer.

Price range : £486.25 - £1,115.52

Lab 4.0 Manometer

The Lab 4.0 is an instrument suitable for gas analysis in all laboratorial activities. The instrument can be used for differential pressure manometer for very small measuring areas, Particle Measurement System or Environmental Gas Analysis with Volatile Organic Compound (VOC) and Indoor Air Quality (IAQ) Sensors, plus ambient sensors for barometric pressure, temperature and humidity.

Price range : £399.55 - £13,550.00