Large Digit and Multi Channel Displays

Multichannel, compact, based on LINUX meter/controller type MultiCon CMC-99 is ideal solution for applications where simultaneous measurement and regulation of numerous channels is required. MultiCon CMC-99 contains up to 48 analog inputs, 16 relay / SSR outputs and 8 current outputs satisfy 0-20mA standard. Controller is equipped with colour TFT display with touchscreen allowing elimination of faulty mechanical keyboards. The RS-485 interface with Modbus-RTU protocol is build in the device for basic communication features.

The CMC-141 is a multichannel display with a built in data logger function accessible via a licence key. The CMC-141 allows for up to 72 analogue inputs (0-20mA, 0-10V) with various input card options for other inputs from Thermocouples, RTDs, pulse or counter inputs, plus a serial interface for Modbus RTU devices. Card options include relay and digital output cards to cover most applications. The CMC-141 includes a 5.7 TFT touchscreen display for easy programming and access.

The CMC-N16 is designed to provide the same functionality as the other Multicon CMC units but in an IP65 wall mounted enclosure. The unit has 13 input/output card options but can be more suitable in locations were a panel mounted enclosure may not be possible. The CMC-N16 uses the same LINUX firmware and includes a touchscreen interface and integrates advanced control functions (PID, ON/OFF, time & profiles etc.) and logging of setpoints, excitations and current state of controlled objects. The RS-485 interface with Modbus-RTU protocol is build in the device for basic communication features.

The SWT-99X Multi-channel Temperature indicator is designed to measure and display up to 8 channels of Thermcouple, RTD or mV inputs. The LCD allows up to 8 channels to be displayed at any one time and also the trend of any channel for the preceeding 12 seconds up to 8 hours. The device is equipped with 2, 4 or 8 current inputs and 2 electronic relay outputs. Suitable for use with Thermocouples (Type K, S, J, T, N, R, B or E), RTD (PT100, PT500 or PT1000) or 0-150mV inputs.

The SWP-99X Multi-channel Process indicator is designed to measure and display up to 8 channels of 0-20mA or 0-10V inputs. The LCD allows up to 8 channels to be displayed at any one time and also the trend of any channel for the preceeding 12 seconds up to 8 hours. The device is equipped with 2, 4 or 8 current inputs and 2 electronic relay outputs.

Large-size (100mm high digits) simple digital panel indicator intended for displaying any numerical values and characters defined by user (in SLAVE mode only) sent from the master device over the RS-485 serial interface link