BMCM External DAQ Systems (LAN, USB)

The USB-AD features 16 Analogue Inputs (5V, 10Hz Sampling rate, with 12 Bit resolution), 1 Analogue Output (5V, with 12 bit resolution), 4 Digital inputs and 4 digital outputs all connected to a PC via a USB connection. Up to 127 devices can be integrated together.

The USB-PIO features 24 Digital TTL Channels via a 25-pin D-Sub female connector to a PC via a USB connection. The data acquisition system is accommodated in the D-Sub connector housing. Suitable for Windows 8.1 and 10 in 64-Bit.

The USB-AD14F features 16 Analogue Inputs (±10V, 20kHz Sampling rate, with 14 Bit resolution), 1 Analogue Outputs (±5V, with 12 bit resolution), 8 digital inputs and 8 digital outputs (first can be configured as a 16-bit counter) all connected to a PC via a USB connection. Up to 127 devices can be integrated together. The digital inputs and outputs are not galvanically isolated but have a 1kOhm resistor to provide protection.

The LAN-AD16fx features 16 Analogue Inputs (selectable ranges of 1V, 2V, 5V, 10V, with a 250kHz total sampling rate and 16 Bit resolution), 2 Analogue Outputs (10V, with 16 bit resolution), 32 digital I/O channels (3 of which can be configured as 32-bit counters) all connected to a LAN network using a TCP/IP protocol to provide a safe and complete data transmission over long distances. Several DAQ systems can be integrated into a single network with several LAN-AD16F devices being fully synchronized. The number of potential units is only limited by the bandwidth of your network. Power supply 12-40v DC, plus units can be supplied by PoE (Power over Ethernet) to reduce cabling and make mobile measurements easier.

The LAN-AD16fx replaces the previous LAN-AD16F units.

The USB-AD16F features 16 Analogue Inputs (selectable ranges of ±1V, ±2V, ±5V, ±10V, with a 250kHz Sampling rate and 16 Bit resolution), 2 Analogue Outputs (10V, with 16 bit resolution), 4 digital inputs and 4 digital outputs (first can be configured as a 19-bit counter) all connected to a PC via a USB connection. Up to 127 devices can be integrated together. Units included galvanic isolation to protect both the connected PC and the analogue channels of the DAQ system. The digital inputs and outputs are not galvanically isolated but have a 1kOhm resistor to provide protection.

The MAL series of miniature amplifiers are suitable for the LAN-AD16FX, USB-AD16F and USB-AD12F external data acquisition modules. The measuring amplifiers of the MAL series are especially characterized by small size and price. The amplifier output is in the range of 5V or 0-5V. The miniature amplifiers are suitable for the measured quantities voltage, current, resistance, PT100, strain gauge, and thermocouple (type K). The frequency-voltage converter MAL-FU is ideal for rotation measurement. The miniature amplifiers of the MAL-ISO series are suitable for electrically isolate signals for higher accuracy measurements. MAL Modules can be fitted to suitable BP Series backplanes for connection to the DAQ modules.

16 way connection boards suitable for use with the LAN and USB AD16F, USB-AD12F, and USB-AD acquisition units and backplanes for housing amplifiers

The Nextview software allows you to visualize, control, automate, configure, scan, analyze and document with one software. You can implement your measurement applications completely without any programming efforts. The full version features all functions of the software. The NextView 4 software is suitable for 32-Bit systems and the NextView5 software is compatible with the latest 64-Bit computers.