Products

Latest added news blog

MSR175 Shock Transportation Data Logger

Kenny Laidlaw

Oct 01,2018

The MSR175 shock transportation data logger is the newest miniature logger from MSR. The MSR175 ut...read more >

VIEW ALL OUR LATEST NEWS

previous product 1/6 next product

APCIe-1564 PCI Express Digital I/O Board

Quick Overview

The APCIe-1564 is a PCI Express digital I/O board for up to 32 optically isolated digital inputs, including 16 interruptible inputs, 3 counter inputs and 32 digital outputs (5-35V @ 50mA per channel, max 0.5A per 8 channels). The APCIe-1564 can monitor digital inputs with a max frequency of 500kHz and a signal delay of 1µs on 3 channels, otherwise 5kHz. 16 digital outputs with a nominal 5V voltage. All connections via two 37-pin Sub-D male connector to screw terminal panels. Power supply 3.3V from PC @ 590mA (max). Built-in watchdog function, timer/counter and short-circuit protection. 64-bit drivers for Windows and Linux as well as programming samples are included, real-time drivers for Windows and Linux are available on request.

View Options

Details

The boards of the APCIe-xxxx series are intended for use in an industrial environment: They are equipped with numerous protective circuits like filters, optical isolation, protection against overvoltage and short-circuits, etc. Thus they ensure a reliable and smooth operation, particularly in case of dangerous interference like voltage peaks or high currents.

Upgrade from PCI to PCI Express

Using PCI boards and looking to upgrade to PCI Express boards, the PCI Express boards are functionally compatible with the related PCI boards. PCI Express boards include new technologies and will improve the performance of your installation. PCIe boards include all the standard functions and options of related PCI board and are fully compatible with existing cables, terminals and a PCIe migration driver programming service is available to assist the changeover from an existing PCI system.

Benefit from the new technologies and the new efficient FPGA components that have been added to the PCI Express boards. The FPGA technology allows for shorter cycle times and the PCI Express boards include FPGA components to reduce the cycle time of signal acquisition and regulation tasks. Use the full hardware and software capacity of your board and accelerate your processes. PCI Express boards use a serial interface instead of a parallel interface used by the PCI boards. The PCIe boards also utilise individual buses for each device connected to it instead of a shared one. These changes allow a 16 slot PCIe board to send or receive data at up to 16GB/s, compared to the 133MB/s achieved by PCI boards.

PCI Express boards come with useful software tools for a fast and convenient integration into your application: The ingenious driver concept, ADDIPACK, includes a wide range of drivers and samples, and a configuration tool assist you from the beginning. The PCIe migration driver programming service is also available to assist the changeover.

Features

Inputs

32 optically isolated digital inputs, 5V , including 16 interruptible inputs
Channels 0-2 can be used as 32-bit counter inputs (up to 500kHz)
Reverse voltage protection
All inputs are filtered

Outputs

32 optically isolated digital outputs, 5V APCIe-1564-5V: Open Collector Outputs. APCIe-1564-5V-HS: High-Side Outputs
Output current per channel 50mA.
Watchdog for resetting the outputs to "0"
At Power-On, reset of the outputs to "0"
Channel Limit: ~ 0.5A per 8 channels (through PTC)
Short-circuit current per output ~0.5 A typical
Self-resetting fuse (electronic fuse)
Overtemperature and overvoltage protection
External voltage supply screened and filtered

Safety Features

Optical isolation 1000V
Creeping distance IEC 61010-1
Protection against fast transients, overvoltage, electrostatic discharge and high frequency EMI
Separate ground lines for inputs and outputs

Applications

Industrial I/O Control
PLC Coupling
Signal Switching
Interface to Electromechanical Relays
Automatic Test Equipment
ON/OFF Monitoring of Motors, Light, etc
Watchdog timer

Specifications

Digital Inputs

Number of Inputs:	32; 4 groups of channels with common ground: Input: 0-7, 8-15, 16-23, 24-31 Ch 0-2: 32-bit counter inputs, 500kHz Ch 4-19: 16 interruptible inputs.
Optical Isolation:	Through optical couplers, 1000 V from the PC to the peripheral
Nominal Voltage:	5V
Inputs Current:	Ch 0-3: 8.5mA @ 5V typical Ch 4-31: 5.9mA @ 5V typical
Inputs Frequency (Max.):	Ch 0-3: 500kHz @ 5V Ch 4-31: 5kHz @ 5V
Logic Input Level:	UH (max.): 6 V / 7.8 mA typ. (channel 4-31) UH (min.): 4 V / 4.1 mA typ. (channel 4-31) UH (max.): 6 V / 11.5 mA typ. (channel 0-3) UH (min.): 4 V / 5.6 mA typ. (channel 0-3) UL (max.): 2 V / 0.8 mA typ. (channel 4-31) UL (max.): >2 V / 1.1 mA typ. (channel 0-3) UL (min.): 0 V / 0 mA typ.
Filters/Protection Circuit:	Input Filters, Transit Diode: RC Filters, 2 diodes, opto-couplers.

Digital Outputs

Outputs:	32
Optical Isolation:	Through optical couplers, 1000V
Output Type:	APCIe-1564-5V: Open Collector APCIe-1564-5V-HS: High-side (Load at ground) acc. to IEC 1131-2
Nominal Voltage:	5V (APCI-1564-5V)
Supply Voltage:	5-12V (5V Version), 5-35V (5V-HS Version)
Current Limit:	0.5A (typ.) per 8 channels (through PTC)
Output Current per Output:	50mA Typical
Short-circuit Current per Output:	0.5A
Timer:	2 x 12-bit, 1 x programmable as watchdog from 1 µs to 4095s.
Switch-Off Time:	l out=0.5A, Load = resistance: 40 μs

Physical and environmental conditions

Dimensions:	168 x 99 mm
System Bus:	According to PCI Express base specification, Revision 1.0a (PCI Express 1.0a)
Place Required:	1-/4-/8-/16-lane PCI Express slot
Operating Voltage:	+3.3V, from the PC
Current Consumption:	Inputs and outputs inactive: Inputs and outputs active:	340mA ±10%, typical ±590mA ±10%, typical
Front Connector:	37-pin SUB-D male connector
Operating Temperature:	0 to 60 °C (with forced cooling)

APCIe-1564 Connection Details

PX901-ZG:	Screw terminal panel for DIN Rail.
ST010:	Standard 37-pin D-Sub connection cable, 2m
ST011:	Standard 37-pin D-Sub connection cable, 5m

Availability: Stock Item

Components / Downloads

For further information, technical advice, or a quotation please call or email us. If you are not sure which product you need one of our technical sales advisors will be happy to discuss your application. We also accept company purchase orders by fax or post. Credit card orders can also be placed over the phone for any product.

REF	DESCRIPTION	PRICE	ORDER ITEM

APCIe-1564 Digital I/O Board
APCIe-1564-5V	APCIe-1564-5V PCI Express Digital Input/Output Board. 32 optically isolated digital inputs (nominal voltage 5V), including 16 interruptible inputs and 32 optically isolated digital outputs (5V). Channels 0-2 can be used as 32-bit counter inputs at up to 500kHz). 1000V optical isolation and reverse voltage protection. Max Input Frequency: 5kHz @ 5V. 37-pin SUB-D male connector Power supply: 3.3V @ Max 560mA. Dimensions: 168 x 99mm, requires 1 PCI slot. Operating Temp: 0 to 60°C (with forced cooling)	£815.08	or call us for a quote

Screw Terminal Panels
PX901-ZG	Screw terminal panel for DIN rails with housing for the 37-pin SUB-D female connector. The terminals allow for the connection of 32 signal lines, 4 external operating voltage feeds and 2 ground lines. Operating temperature 0-70°C.	£163.89	or call us for a quote
PX9000	Screw terminal panel with housing for DIN-rail mounting. 37-pin female connector to 3 x 39-pin terminal block with LED status indication. One row of 32 connections for peripherals, 2 rows of diode protected terminals for voltage supply to the sensors / actuators and for cascading several PX9000. Not suitable for 5V option.	£151.18	or call us for a quote
PX8500-G	External 8-channel relay board with housing for DIN-rail mounting. Each board has 8 relay inputs that connect to the first 37-pin SUB-D female connector. The second 37-pin SUB-D female connector can be used to cascaded multiple boards via the ST022 cables. Additional boards can also be connected via the ST8500 ribbon cable. The PX8500-G can be cascaded in 16, 24 and 32 relays.	£221.03	or call us for a quote

Connection Cables
ST010	Standard Shielded Round Cable. 37-pin SUB-D female connector / 37-pin SUB-D male connector, twisted-pair conductors. 2m cable length.	£106.30	or call us for a quote
ST011	Standard Shielded Round Cable. 37-pin SUB-D female connector / 37-pin SUB-D male connector, twisted-pair conductors. 5m cable length.	£93.13	or call us for a quote
ST010-S	Standard Shielded Round Cable. 37-pin SUB-D female connector / 37-pin SUB-D male connector, twisted-pair conductors for high current with a separate connection for 24V voltage supply. 2m cable length.	£94.84	or call us for a quote
ST022	Standard Shielded Round Cable. 37-pin SUB-D male connector / 37-pin SUB-D male connector, twisted-pair conductors. Provides a connection between two PX8500 or PX90-- boards. 2m cable length.	£80.86	or call us for a quote
ST8500	Ribbon cable between two PX8500 relay output boards. 10cm cable length.	£13.00	or call us for a quote