PA 2000 Digital Output Board

Quick Overview

The PA2000 is a digital output board with 32 digital outputs. Each output channel has a voltage range of 10 to 36V with an output current of 500mA. 3 16 bit timers and 1 programmable watchdog and 2 output channels for generating square wave output signals. All output channels can be triggered independently with DIP switch addressing. The board is optically isolated up to 1000V and protected against overvoltage. The PA2000 is suitable for applications such as industrial digital output control, monitoring of motors & lights, machine interfacing, signal switching, etc. A CD-ROM with software drivers and programming examples is supplied with the board.

View Options

Details

Features

32 digital outputs, 24 V, isolated
Output current: 500 mA
Voltage range: 10 to 36 V
Diagnostic reports, readable through status register in case of short-circuit, overtemperature, voltage drop or watchdog
3 x 16-bit timer (82C54): Timer as programmable watchdog for the reset of the outputs to “0”; Function release through software; Control of 2 output channels for generating square-wave signals
Interrupt triggered through error on the outputs or through timer2
Addressing through DIP switches
16-bit or 8-bit data bus
After power-on the outputs are reset to “0”

Safety Features

Optical isolation 1000 V
Creeping distance IEC 61010-1 (VDE411-1)
Protection against fast transients (burst), overvoltage, electrostatic discharge and high-frequency EMI
Maximum output current for 32 output channels: 6 A typ. (2 x 3 A)
Self resetting fuse (electronic fuse)
Short-circuit current per output 1.5 A typ. Output capacitors minimise electromagnetic emissions
Fast demagnetization in case of inductive loads
External 24 V supply screened through a Protective circuitry

Applications

PLC connection
Industrial digital output control
Signal switching
Interface to electromechanical relays
Automatic test equipment
Monitoring of motors, lights
Watchdog timer
Machine interfacing

Specifications

Digital Outputs

Outputs:	32
Optical Isolation:	Through optical couplers, 1000V from the PC to the perioheral
Output Type:	High-side (Load at ground) acc. to IEC 1131-2
Nominal Voltage:	24V
Supply Voltage:	10 to 36V, min. 5V (shut-down) through front connector
Max. Current for 32 Outputs:	6A typical (2 x 3A)
Output Current/Channel:	500mA typical/channel
Output Current for 16 Channels:	200mA typical/channel
Short-circuit Current/Shut-Down at 24V, Rload < 0.1W:	1.5A
RDS ON Resistance:	0.4W max
Switch-On Time:	l out=0.5A, Load = resistance: 120 μs
Switch-Off Time:	l out=0.5A, Load = resistance: 40 μs
Overtemperature (Shut-Down):	170°C (Output driver)
Temperature hysteresis:	20°C (Output driver)

Physical and environmental conditions

Dimensions:	156 x 99 mm
System Bus:	ISA, XT or AT slot
Place Required:	short board
Operating Voltage:	+5 V, ±5 % from the PC / 174mA
Current Consumption:	186mA ±10mA typical
Front Connector:	37-pin SUB-D male connector
Operating Temperature:	0 to 60 °C (with forced cooling)

PA 2000 Connection Details

PX9000:	3 row screw terminal panel for digital outputs
PX901-D:	Screw terminal panel for digital I/O
PX901-DG:	Screw terminal panel for digital I/O, DIN Rail mounting
PX8500-G:	Relay output board, cascadable, DIN Rail mounting
ST010:	Standard 37-pin D-Sub connection cable, 2m
ST011:	Standard 37-pin D-Sub connection cable, 5m
ST010-S	Same as ST010 but separate 24V supply cable.
ST022:	Round shielded cable between two PX8500, 2m
ST8500:	Ribbon cable for cascading two PX8500.

Availability: Stock Item

Components / Downloads

For further information, technical advice, or a quotation please call or email us. If you are not sure which product you need one of our technical sales advisors will be happy to discuss your application. We also accept company purchase orders by fax or post. Credit card orders can also be placed over the phone for any product.

REF	DESCRIPTION	DOWNLOADS	PRICE	ORDER ITEM

PA2000 Digital Output Board
PA2000	32 optically isolated digital outputs, 24 V, high-side driver outputs 500 mA, timer, watchdog, short-circuit protection	Datasheet Size: (518.8 KB)	£546.63	or call us for a quote

Screw Terminal Panels
PX901-D	Screw terminal panel with LEDs, for the connection of 37 signal lines for digital boards with housing for installation. Not suitable for 5V option.		£120.88	or call us for a quote
PX901-DG	Screw terminal panel with LEDs, for the connection of 37 signal lines for digital boards with housing for installation on a DIN rail. Not suitable for 5V option.		£162.17	or call us for a quote
PX9000	Screw terminal panel with housing for DIN-rail mounting. 37-pin female connector to 3 x 39-pin terminal block with LED status indication. One row of 32 connections for peripherals, 2 rows of diode protected terminals for voltage supply to the sensors / actuators and for cascading several PX9000. Not suitable for 5V option.		£153.30	or call us for a quote
PX8500-G	External 8-channel relay board with housing for DIN-rail mounting. Each board has 8 relay inputs that connect to the first 37-pin SUB-D female connector. The second 37-pin SUB-D female connector can be used to cascaded multiple boards via the ST022 cables. Additional boards can also be connected via the ST8500 ribbon cable. The PX8500-G can be cascaded in 16, 24 and 32 relays.		£224.10	or call us for a quote

Connection Cables
ST010	Standard Shielded Round Cable. 37-pin SUB-D female connector / 37-pin SUB-D male connector, twisted-pair conductors. 2m cable length.		£113.77	or call us for a quote
ST011	Standard Shielded Round Cable. 37-pin SUB-D female connector / 37-pin SUB-D male connector, twisted-pair conductors. 5m cable length.		£113.31	or call us for a quote
ST010-S	Standard Shielded Round Cable. 37-pin SUB-D female connector / 37-pin SUB-D male connector, twisted-pair conductors for high current with a separate connection for 24V voltage supply. 2m cable length.		£96.16	or call us for a quote
ST022	Standard Shielded Round Cable. 37-pin SUB-D male connector / 37-pin SUB-D male connector, twisted-pair conductors. Provides a connection between two PX8500 or PX90-- boards. 2m cable length.		£82.00	or call us for a quote
ST8500	Ribbon cable between two PX8500 relay output boards. 10cm cable length.		£13.18	or call us for a quote