Addi Data ISA Data Acquisition Boards

The APCI-3200 is a PCI temperature measurement board with 4, 8 or 16 channels for thermocouples or 8 inputs for RTD (PT100) temperature sensors. Each channel can be configured for a thermo­couples, RTD or as an analog voltage input channel. The APCI-3200 includes 8 independent current sources for RTD and one current source for the cold junction compensation on PX3200-G. 64-bit drivers for Windows 8/7/Vista/XP and Linux as well as programming samples are included, real-time drivers for Windows and Linux are available on request.

The APCI-3300 is a PCI pressure measurement board with 4 or 8 channels for strain gauges or 8 voltage inputs. Each channel can be a differential strain gauge input or as an analog voltage input channel. The APCI-3300 includes 8 independent voltage sources for strain gauge inputs. 64-bit drivers for Windows 8/7/Vista/XP and Linux as well as programming samples are included, real-time drivers for Windows and Linux are available on request.

The APCI-3600 is a PCI noise and vibration measurement board with 8 channels for ±10V inputs via a BNC male connector with selectable frequencies from 2kHz to 200kHz. Each input channel can be a differential or single ended input with simultaneous sampling. The APCI-3600 includes 2 analogue outputs and 16 configurable digital I/O's. The APCI-3600 includes 8 current sources for direct connection of ICP sensors. 64-bit drivers for Windows 8/7/Vista/XP and Linux as well as programming samples are included, real-time drivers for Windows and Linux are available on request.

The APCI-3701 is a PCI length measurement board with 8 or 16 channels for inductive transducers, LVDT or half-bridge sensors. The APCI-3701 includes a sinus generator supply. 64-bit drivers for Windows 8/7/Vista/XP and Linux as well as programming samples are included, real-time drivers for Windows and Linux are available on request. Software includes 50 pre-calibrated transducer options and easy step by step instructions for calibrating transducers to individual channels.

The PA1000 a digital state input board with 32 isolated channels, 14 of which are interruptible. Interruptible channels allow AND, OR and OR Priority logic functions. The PA1000 is suitable for applications such as digital monitoring, signal switching, machine interfacing, etc. A CD-ROM with software drivers and programming examples is supplied with the board.

The PA1500 is a digital I/O board with 16 digital inputs, 14 interruptible, and 16 digital outputs. All inputs are filtered with diagnostic report through status register and a timer programmable watchdog to reset outputs to "0". All output channels can be interrupt triggered through watchdog with DIP switch addressing. The board is optically isolated up to 1000V and protected against overvoltage. The PA1500 is suitable for applications such as industrial I/O, acquisition of sensor data, signal analysis, PLC connection, etc. A CD-ROM with software drivers and programming examples is supplied with the board.

The PA1508 is a digital I/O board with 8 digital inputs and 8 digital outputs. All inputs are filtered with 2 diagnostic outputs and 1 programmable watchdog, plus each input channel has an individual ground connections. All output channels can be triggered independently with DIP switch addressing. The board is optically isolated up to 1000V and protected against overvoltage. The PA1508 is suitable for applications such as industrial I/O, automatic test equipment, interface to electrochemical relays, etc. A CD-ROM with software drivers and programming examples is supplied with the board.

The PA2000 is a digital output board with 32 digital outputs. Each output channel has a voltage range of 10 to 36V with an output current of 500mA. 3 16 bit timers and 1 programmable watchdog and 2 output channels for generating square wave output signals. All output channels can be triggered independently with DIP switch addressing. The board is optically isolated up to 1000V and protected against overvoltage. The PA2000 is suitable for applications such as industrial digital output control, monitoring of motors & lights, machine interfacing, signal switching, etc. A CD-ROM with software drivers and programming examples is supplied with the board.