Omni Instruments
contact icon+44 (0) 845 9000 601
+44 (0) 1382 443000
WE ARE HERE TO HELP

Contact our technical sales team now to discuss your requirements

help icon
MY BASKET basket arrow

£0.00

My Cart

You have no items in your shopping cart.

Click basket to edit.

Products

Latest added news blog
CDI5450 Hot Tap Compressed Air Flow Meter
Kenny Laidlaw
Jun 14,2017
The CDI 5450 is a hot tap compressed air flow meter is a modified version of the 5400 compressed air...read more >
CMP21 Pyranometer

CMP21 Pyranometer

4+ Weeks Del.

Quick Overview

The CMP21 Pyranometer is a secondary standard pyranometer that is similar to the CMP11 but has individually optimised temperature compensation. The CMP21 uses a 32-junction thermopile detector and provides an expected output of 0-20mV based on a sensitivity of 7 to 14µV/Wm². The CMP21 has two, 2mm thick, high quality concentric domes which reduces directional error and improves thermal isolation. The CMP21 has an internal 10K thermistor, or PT100, sensor to monitor the housing temperature, along with individual temperature and direction response values for post-processing of recorded data. The CMP21 also has a refillable desiccant chamber. Spectral range of 285 to 2800nm. The CMP21 is the choice for scientific use and in top level solar radiation monitoring networks, such as the World Meteorological Organisation.
View Options

Details

The housing design of the CMP 21 is fitted with a screw-in drying cartridge that can simply be removed using a coin. This allows the desiccant to be replaced as required using the convenient refill packets. The CMP 21 also features a passive temperature compensation circuit with a standardised linear function.

The CMP 21 has a 32-junction thermopile sensing element, which features faster response, better linearity and a wider measurement range than the CMP 3 and CMP 6. Additionally, the CMP 21's are individually optimised for temperature compensation and each sensors includes a separate 10K thermistor, or PT100 sensors to monitor the housing temperature for post-processing compensation adjustments.

The integral bubble level is raised to the top of the housing and can be viewed without removing the redesigned snap-on sun shield, which also covers the connector. The connector with gold-plated contacts allows for easy exchange and re-calibration.

It is the choice for scientific use and in top level solar radiation monitoring networks such as the BSRN (Baseline Surface Radiation Network) or WMO (World Meteorological Organisation).

Diagram

Specification

Spectral range: 285 to 2800nm
Sensitivity: 7 to 14µV/W/m²
Response time: <5 s
Zero offset A: <7 Wm²
Zero offset B: <2 Wm²
Directional error (Up to 80º with 1000 W/m² beam): <10 Wm²
Temperature dependence of sensitivity (-10 to +40ºC): <1 %
Temperature sensor output: 10K Thermistor (PT100 Optional)
Operating temperature range: -40 to +80°C
Maximum solar irradiance: 4000 Wm²
Field of view: 180°

Availability: Stock Item

 

Related Products

Components / Downloads

For further information, technical advice, or a quotation please call or email us. If you are not sure which product you need one of our technical sales advisors will be happy to discuss your application. We also accept company purchase orders by fax or post. Credit card orders can also be placed over the phone for any product.

REF DESCRIPTION DOWNLOADS PRICE ORDER ITEM
 
CMP21 Secondary Standard Pyranometer with 10K Thermistor.
0362920-010
0362920-010
CMP 21 Secondary Standard Pyranometer. Two, 2mm thick, high quality concentric domes. Integrated leveling. Sun shield. Spectral range 285-2800nm, response time less than 5 sec (95%), Operating temperature -40 to +80°C. Thermopile detector. Sensitivity 7 to 14µV/Wm². 10K Thermistor output. Supplied with no plug or cable.
View FileDatasheet
   Size: (1.1 MB)
£2,421.00
or call us for a quote
0362920-012
0362920-012
CMP 21 Secondary Standard Pyranometer. Two, 2mm thick, high quality concentric domes. Integrated leveling. Sun shield. Spectral range 285-2800nm, response time less than 5 sec (95%), Operating temperature -40 to +80°C. Thermopile detector. Sensitivity 7 to 14µV/Wm². 10K Thermistor output. Supplied with waterproof 4-pin plug connector with 10m of pre-wired yellow signal cable.
£2,505.00
or call us for a quote
 
CMP21 Secondary Standard Pyranometer with PT100
0362920-020
0362920-020
CMP 21 Secondary Standard Pyranometer. Two, 2mm thick, high quality concentric domes. Integrated leveling. Sun shield. Spectral range 285-2800nm, response time less than 5 sec (95%), Operating temperature -40 to +80°C. Thermopile detector. Sensitivity 7 to 14µV/Wm². PT100 output. Supplied with no plug or cable.
£2,547.00
or call us for a quote
0362920-022
0362920-022
CMP 21 Secondary Standard Pyranometer. Two, 2mm thick, high quality concentric domes. Integrated leveling. Sun shield. Spectral range 285-2800nm, response time less than 5 sec (95%), Operating temperature -40 to +80°C. Thermopile detector. Sensitivity 7 to 14µV/Wm². PT100 output. Supplied with waterproof 8-pin plug connector with 10m of pre-wired yellow signal cable.
£2,636.00
or call us for a quote
 
Connection Options for CMP Pyranometers, CGR3 (10K), CGR4 (10K), CVF4 & CNF4 Ventiliation units.
2523145
Waterproof 4-pin plug connector for the following Kipp & Zonen equipment. CMP Series pyranometers, CGR3 & CGR4 pyrgeometers and CVF4 & CNF4 ventilation units. Requires customers own cable wiring.
£25.00
or call us for a quote
0362611
Waterproof 4-pin plug connector with 10m of pre-wired high quality yellow signal cable with 4 wires and a shield covered with black sleeve. Suitable for the following Kipp & Zonen equipment. CMP Series pyranometers, CGR3 & CGR4 pyrgeometers and CVF4 & CNF4 ventilation units.
£112.00
or call us for a quote
0362613
Waterproof 4-pin plug connector with 25m of pre-wired high quality yellow signal cable with 4 wires and a shield covered with black sleeve. Suitable for the following Kipp & Zonen equipment. CMP Series pyranometers, CGR3 & CGR4 pyrgeometers and CVF4 & CNF4 ventilation units.
£239.00
or call us for a quote
0362614
Waterproof 4-pin plug connector with 50m of pre-wired high quality yellow signal cable with 4 wires and a shield covered with black sleeve. Suitable for the following Kipp & Zonen equipment. CMP Series pyranometers, CGR3 & CGR4 pyrgeometers and CVF4 & CNF4 ventilation units.
£448.00
or call us for a quote
 
Connection Options for SMP's, CMP21 (PT100), CMP22 (PT100), CGR3 (PT100), CGR4 (PT100), CHP1, CNR4, UVS, CSD3
2523146
Waterproof 8-pin plug connector for the following Kipp & Zonen equipment. SMP Pyranometers, CMP Pyranometers with PT100 output, CGR3 and CGR4 with PT100 output, CHP1, CNR4, UVS Radiometers and CSD3 Sunshine Duration Sensors.
£33.00
or call us for a quote
0362623
Waterproof 8-pin plug connector with 25m of pre-wired high quality yellow signal cable with 8 wires and a shield covered with black sleeve. For SMP Smart Pyranometers, CMP21 (PT100), CMP22 (PT100), CGR3 (PT100), CGR4 (PT100), CHP1, CNR4, UVS, CSD3
£245.00
or call us for a quote
0362621
Waterproof 8-pin plug connector with 10m of pre-wired high quality yellow signal cable with 8 wires and a shield covered with black sleeve. Suitable for: For SMP Smart Pyranometers, CMP21 (PT100), CMP22 (PT100), CGR3 (PT100), CGR4 (PT100), CHP1, CNR4, UVS, CSD3
£120.00
or call us for a quote
0362624
Waterproof 8-pin plug connector with 50m of pre-wired high quality yellow signal cable with 8 wires and a shield covered with black sleeve. For SMP Smart Pyranometers, CMP21 (PT100), CMP22 (PT100), CGR3 (PT100), CGR4 (PT100), CHP1, CNR4, UVS, CSD3
£456.00
or call us for a quote
 
Mounting Options
0362700
CMF 1 Mounting fixture has a 88mm diameter round plate with a non-removable mounting rod of 16mm diameter and 350mm long. Can be mounted to a pole or wall with the CMB 1 mounting bracket.
£224.00
or call us for a quote
0362703
0362703
CMF 4 Mounting fixture has a 280mm diameter plate with a non-removable mounting rod of 20mm diameter and 350mm long. Can be mounted to a pole or wall with the CMB 1 mounting bracket. Suitable for ventilated radiometers.
£463.00
or call us for a quote
0369701
0369701
CMB 1 Mounting Bracket. This bracket is suitable for various mounting rod sizes, from 12mm to 20mm diameter, and can be secured via u-bolts to masts or poles from 22mm up to 60mm diameter. The bracket can also be secured directly to a wall, or other flat surface.
£216.00
or call us for a quote
 
Enclosure Mounted Amplifier
5331A3B-ENCL
5331A3B programmable transmitter with a 7.2-35vDC power supply. Single channel unit for PT100, thermocouple, Resistance or bi-polar mV input, producing a 2-wire 4-20mA output. 1.5kvAC galvanic isolation. Programmed to suit the connected sensor. Transmitter fitted in weatherproof enclosure with 2 cable glands.
View FileDatasheet
   Size: (245.66 KB)
£254.19
or call us for a quote
 
5114A Programmable Transmitter
5114A-A
Single channel 5114A programmable transmitter. Single channel unit for RTD, TC, mV, linear resistance, mA and V inputs, producing a (0)4-20mA, 0-10vDC output. 3-port 3.75 kVAC galvanic isolation. Can be mounted vertically or horizontally on a DIN rail. Power Supply 21.6 to 253vAC or 19.2 to 300vDC.
View FileDatasheet
   Size: (256.55 KB)
£227.64
or call us for a quote